Bits & Sockets Sets

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 175mm

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Molybdenum, drop-forged, deep WallDrive® impact socket.• Hardened and tempered for added strength, wi more→th a phosphate finish for greater corrosion resistance.• Ideal for use with air impact wrenches.• Lifetime guarantee*.Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches.• Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches. • Lifetime guarantee*. …

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→13 • Dia2 Metric: 19 • Cut Length Metric: 10 • Overall Length Metric: 56

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and v more→eneers. Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing. 1/2in shank, 50mm cutting depth for bigger routers. Perfect for replicating deeper workpieces including heavier joinery and furniture making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: …

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications: • Shank Diameter more→: 12 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 94.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4 • Angle: 90

Alternative bearing B127A removes the lower quirk. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • more→Bearing Dia Metric: 9.5 • Radius 1 Metric: 4 • Radius 2 Metric: 4

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.5 • Cut Length Metric: 15.9 & more→bull; Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 7.9

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Le more→ngth Metric: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 61.5 • Bearing Dia Metric: 22 • Radius 1 Metric: 2.4

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications: • Shank Diameter: 8 mm • Dia Metric: 22 • Cut L more→ength Metric: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 61 • Bearing Dia Metric: 22 • Radius 1 Metric: 2.4

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Le more→ngth Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 22 • Radius 1 Metric: 4 • Radius 2 Metric: 5.5

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications: • Shank Diameter: 1/4 • Dia Metric: 26 • Dia Imperial: 1 1/32 • more→Dia2 Metric: 22 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 70.5 • Bearing Dia Metric: 15.9 • Radius 1 Metric: 4.8

By raising the cutter, the top quirk is removed. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 20 • Cut Length Imperial: 25/32 • Overall Length Metric: 69.5 • Be more→aring Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush f more→itted to the router base should be used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 60

Supplied with extra 1/2 inch bearing for removing the lower quirk. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 17.5 • Cut Length Imperial: 11/16 • Overall Length Me more→tric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 2 Metric: 4.8

For panel and veining work. Ideal for barley twists using the Routerlathe. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length Metric: 16 &b more→ull; Cut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 7.5

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Specifications: • Shank Diameter: 1/4 • Dia Metric: 38.6 • Cut Length Metric: 15.9 & more→bull; Cut Length Imperial: 5/8 • Overall Length Metric: 68 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 20 • Dia Imperial: 25/32 • Cut Length Me more→tric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 57 • Overall Length Imperial: 2 1/4 • Radius 1 Metric: 5.2

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 37 • Overall Length Metric: 79

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 64

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67