Bits & Sockets Sets

For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Dia Imperial: 1 1/2 • Cut Length Metric: 27 • Overall L more→ength Metric: 64 • Angle: 45

Supplied with extra 1/2 inch bearing for removing the lower quirk. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metr more→ic: 64.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 5 • Radius 2 Metric: 4

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28.5 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 6 more→.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: more→6.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6 more→.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2.5 • Overall Length Metric: 80 • Bearing Dia Metric: 22

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2.8 • Overall Length Metric: 80 • Bearing Dia Metric: 22

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 3 • Overall Length Metric: 80 • Bearing Dia Metric: 22

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2 • Overall Length Metric: 80 • Bearing Dia Metric: 22

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 3 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 107

Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Specifications: • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 40 • Overall Length Metric: 100 • Type or Grade: Up-cut

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 57

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 57

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19 • Overall Length Metric: 60

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 66

For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 18 • Cut Length Metric: 12 • Overall Length Metric: 45 • Angle: 90