Bits & Sockets Sets

This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2

The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Lengt more→h Metric: 70 • Radius 1 Metric: 12.5

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric more→: 33 • Overall Length Metric: 71.1 • Radius 1 Metric: 20

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25 • Overall Length Metric: 66

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 32 • Overall Length Metric: 73

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 25 • Overall Length Metric: 63

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Requires heavy duty arbor accessory. Recommend more→ed used in a fixed head router at 12,000 rpm. Specifications: • Dia Metric: 86 • Sawbore: 12 • Saw Kerf Metric: 2 • Saw Plate Thick Metric: 1 • Saw Teeth: 12

Ideal for producing nosings and attractive edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.2 • Cut Length Metric: 35 • Overall Length Metric: 83 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 9.5

Bit socket set TORX®, with holding function for especially convenient screwdriving and a reduced risk of losing the screw when approaching the workpiece. Features and Benefits: • Compact textile more→box with high robustness, low weight and volume • Bit socket (non-impact) for manual or power tool operations • The holding function holds screws securely on the tool • Knurling on lower socket end for more grip when used manually • With Take it easy tool finder: colour coding by size Contents: 1x 8767 C TORX® HF 2 Zyklop bit socket set with 1/2" drive, with holding function, 6 pieces; 6x 8767 C HF TORX® Zyklop bit socket with 1/2" drive with holding function: TX 20x140.0, …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

To Connect Directly To Drills / Drivers Equipped With A 1/4´´ Head And To Any 1/4´´ Bit Holder.Specifications: - Measurements (Mm): 4.0-30.0 X 105 (14 Steps) - Size (No.): Two- Ø (Mm): 4.0-30.0 - Over more→all Length (Mm): 105- Number Of Steps: 14- Ø Stem (Mm): 6.35x27

High performance solid carbide K 20 twist drill, especially well suited for high strength steels at high cutting speeds.Specifications: - Ø: 10,5 mm- Total length L1: 133,0 mm- Flute length L2: 87,0 m more→m- Material: Tungsten carbide- Surface: Tialn- Cutting direction: right hand cutting- Shank: cylindrical- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle : 118°- Helix angle: 20-30°- Weight: 0,05900 Kg

1/2in drive 18 piece hex socket set contains a selection of sockets made from high-performance alloy steel with a matt finish. supplied in an oil and temperature resistant polypropylene case. contains more→:
1/2in drive 18 piece hex socket set contains a selection of sockets made from good-performance alloy steel with a matt finish. supplied in an oil and temperature resistant polypropylene case. contains:
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.
Power source type: hand-powered.

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

Five piece cutter pack aimed at kitchen fitters. Pack includes 1/2 inch diameter x 50mm cut length worktop cutters. Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and cer more→tain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. Non stick PTFE coated. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 93.5 • Pack Qty: 5 pack Contents: 5 x Worktop cutter (C153X1/2TC)

Range of small diameter shank cutters for CNC routers. Used for specialised applications including signmaking & PRB machining. Up-cut prevents burning in plunge cuts. Two flute. Specifications: more→• Shank Diameter: 3mm • Dia Metric: 3 • Cut Length Metric: 25 • Overall Length Metric: 65 • Type or Grade: Up-cut

Range of small diameter shank cutters for CNC routers. Used for specialised applications including signmaking & PRB machining. Down-cut prevents feathered edges. Two flute. Specifications: &bull more→; Shank Diameter: 3mm • Dia Metric: 3 • Cut Length Metric: 25 • Overall Length Metric: 65 • Type or Grade: Down-cut