Bits & Sockets Sets

Highly efficient standard drill with morse taper. For drilling steel, cast steel and cast iron – alloyed and unalloyed. Highly secure against fracture.Specifications: - Ø : 39,5 mm- Total length L1: 349,0 mm- Flute length L2: 200,0 mm- Material: Hss-G- Surface: bright - Cutting direction: right hand cutting- Shank: MT4- Drilling depth: 6 x D- Point cut Shape A: Cut chisel edge- Point angle: 118°- Helix angle: 20-30°- Tolerance: h8- Weight: 1,65000 Kg

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. With locking pin for secure socket holding. Sold loose.

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 18mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 18 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 18mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings Specifications: • Shank Diameter: 1/2 • Cut Length Metric: 18 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/28 with Ref. 90/21. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Cut Length Metric: 25 • Overall Length Metric: 73 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 19

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 60 • Cut Length Metric: 27 • Overall Length Metric: 65.1 • Radius 1 Metric: 20

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 33 • Cut Length Metric: 20 • Overall Length Metric: 75 • Radius 1 Metric: 10

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 42.9 • Cut Length Metric: 25.4 • Overall Length Metric: 78 • Radius 1 Metric: 12.7

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 11 • Saw Teeth: 4

web --> vigour-equipment
Drive: Square, hollow 6.3 mm (1/4 inch)
HAZET Safety-Insert-System (SIS).

The BOSCH PROFESSIONAL Expert SDS Max-8x 28x600x720 mm Wall Hammer Drill Bit is a high quality and durable drill bit designed specifically for heavy-duty tasks such as drilling through concrete, masonry, and brick walls. With a length of 600mm and a diameter of 28mm, this drill bit provides exceptional strength and stability, allowing for precise and efficient drilling. It features an SDS Max shank, which ensures a secure and snug fit in the chuck, minimizing the risk of slippage during operation.The drill bit is made from high-quality carbide, which not only enhances its durability but also increases its drilling speed and efficiency. The grey metallic finish gives it a sleek and professional …

ExtensionFeatures:- Safety lock- Fast release button- Matt Chrome fi nish- Chrome vanadium steelSpecifications:Length: 400mmWeight: 2kg

SKM.SR non sparking socket extensions. Made from a non-sparking and anti-magnetic copper beryllium alloy. Specifications • Drive: 1/2” • Size: 100mm

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 55mm