only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Bits & Sockets Sets

 prices on 17764 models  
£60
clear
Save List
Show
This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Round Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.
from £49.99 up to £51.95 
Compare prices and buy Trend Set/SS8X1/4TC - 12 Piece Cutter Set (1/4" Shank)
Zoro.co.uk (United Kingdom) →
£50.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Tooled-up.com  →
£52.00
Compare prices3→
Two flute for fine finish. Specially ground for cutting acrylic. Can be used on phenolic resin. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76
from £51.95
Compare prices and buy Trend Acrylic Two Flute Engraving Router Cutter 12.7mm 32mm 1/2" ACR3/81X1
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/2in
from £44.65 up to £53.99 
Compare prices and buy Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm TREC15212
Travisperkins.co.uk (United Kingdom) →
£45.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Tooled-up.com  →
£52.00
Zoro.co.uk (United Kingdom) →
£54.00
Compare prices4→
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 8 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 12.7
from £51.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Biscuit Jointer Set 4mm 37.2mm 8mm C152X8MMT
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 12 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7
from £51.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Biscuit Jointer Set 4mm 37.2mm 12mm C152X12M
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
You may be interested in
Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4
from £51.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Classic Ogee Router Cutter 4mm 15.9mm 1/4" C
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 8 mm • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 4
from £51.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Classic Ogee Router Cutter 4mm 15.9mm 8mm C0
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric: 18 • Overall Length Metric: 69.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16
from £51.95
Compare prices and buy Trend CraftPro Bearing Guided Round Over and Ovolo Router Cutter 34.9mm 18
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 8 mm • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
from £51.95
Compare prices and buy Trend CRAFTPRO Round Over and Ovolo Router Cutter 31.7mm 15.9MM 8mm C078X8
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 6.3
from £51.95
Compare prices and buy Trend CRAFTPRO Sash Bar Router Cutter 19.1mm 12.7mm 1/4" C071X1/4TC
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 9.5
from £51.95
Compare prices and buy Trend CRAFTPRO Sash Bar Router Cutter 25.4mm 15.9mm 1/4" C073X1/4TC
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Overall Length Metric: 79
from £51.95
Compare prices and buy Trend Down Cut Shear Two Flute Router Cutter 12.7mm 38mm 1/2" 53/82X1/2TC
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
All articles about bits / sockets
Screwdrivers and drills for dummies
What is the best screwdriver?
Sparks, smoke, crunch and burning smell: what can break in a drill or screwdriver
Best cordless pistol grip electric screwdrivers
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 35 • Overall Length Metric: 81
from £43.99 up to £55.99 
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 10mm 35mm 1/2" 3/60X1/
Zoro.co.uk (United Kingdom) →
£44.00
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Zoro.co.uk (United Kingdom) →
£56.00
Compare prices4→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Overall Length Metric: 57
from £43.99 up to £61.99 
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 18mm 25mm 1/4" 4/29X1/
Zoro.co.uk (United Kingdom) →
£44.00
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Zoro.co.uk (United Kingdom) →
£62.00
Compare prices4→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Overall Length Metric: 67
from £44.99 up to £55.99 
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 18mm 25mm 1/2" 4/29X1/
Zoro.co.uk (United Kingdom) →
£45.00
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Zoro.co.uk (United Kingdom) →
£56.00
Compare prices4→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 50 • Overall Length Metric: 84 • Type or Grade: Shorter shank
from £51.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 12mm 50mm 1/2" 3/73DMX
Tooled-up.com  →
£52.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Compare prices2→
Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Features:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch
from £26.20 up to £51.95 
Compare prices and buy Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut
Toolstop.co.uk (United Kingdom) →
£26.00
Zoro.co.uk (United Kingdom) →
£40.00
Mytoolshed.co.uk (United Kingdom) →
£52.00
Tooled-up.com  →
£52.00
Compare prices4→
All - round set comprising seven sizes of tap (taper, secondary and bottoming) and seven HSS drills. Packed in case with display sleeve.
from £46.95 up to £65.58 
Compare prices and buy Draper Metric Tap and HSS Drill Set (28 Piece)
Mytoolshed.co.uk (United Kingdom) →
£47.00
Tooled-up.com  →
£47.00
Toolbee.co.uk (United Kingdom) →
£52.00
Electricalworld.com (United Kingdom) →
£66.00
Compare prices4→
A new addition to the AllDrive range is this 17 piece socket set with Go-thru' function. Manufactured from Chrome Vanadium in mirror finish. The Go-thru' function handles like a deep socket and fits AF, Metric, Spline, Star fixings. Also supplied is an adaptor which will allow the 45 teeth ratchet to be used with standard sockets and a hollow 75mm extension bar for recessed bolts. The ratchet can also be used with standard 1/4" shank bits. Socket sizes include: 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14mm.Go-thru' function.Chrome Vanadium.AllDrive tapered V profile.13 sockets, 39 applications.45 teeth ratchet.
£51.90
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
¼” hex shank
Easy to carry, heavy duty plastic stackable case
Ideal Product
from £40.95 up to £51.90 
Compare prices and buy Makita E-15095 60 Piece Hand Tool and Bit Set
Idealo.co.uk (United Kingdom) →
£41.00
Amazon.co.uk  →
£52.00
Compare prices2→
8 Spline Bits x 30mm long: M4, M5, M6, M8, M9, M10, M12, M14. Manufactured in S2 Steel. 2 Spline Bits x 30mm long: M16, M18. Manufactured from Chrome Vanadium. 7 Spline Bits x 75mm long: M5, M6, M8, M9, M10,M12, M14. Manufactured from S2 Steel. 2 Spline Bits x 75mm long: M16, M18. Manufactured from Chrome Vanadium. Also includes 2 x 10mm long Bit Adaptors: 1/2"D and 3/8"D.
£51.89
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Universal Dry Core For Drilling Large Clean Holes In Most Building Materials Including Semi-Engineering Bricks Clay Products And Limestone.PTDTIMGPCP48150
£51.76
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Bits / Sockets TOPEX 38D652
TOPEX 38D652
Kit:socket heads 10 pcs
Bits:standard
Socket heads:6-points
Landing square:1/4 "
In box:ratchet wrench
Prices 1
£51.76
Amazon.co.uk
Delivery: to United Kingdom
Report
Amazon.co.uk
24 more item(s)
1 ... 21 22 23 24 25 ... 741
Filters
Price
from£ up to£ 
Brands
Set
Items in set
Landing square
Bits included
Socket heads included
More features
Bit length
Socket depth
Got ideas or questions about filters? Click here!
Models