Bits & Sockets Sets

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. With locking pin for secure socket holding. Sold loose.

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

Expansion Inserts No. 4 for Bearing Puller | Internal Thread M10 | Maximum Tensile Force 40 kN, RFID chip, set, 2 pieces.
Product strengths: tool with an RFID chip so that it can be found in the workshop. The Facom integrated chip guarantees you easy to find and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires adequate organisational equipment. Use with the reversible ratchets and drive squares 3/8 inch and 1/2 inch
Technical data: |d [mm]: 9.0|No. : 4|with internal thread: M10|T [kN]: 40|[g]: 39|[kg]: 0.040

Features:- 6mm diameter Phillips 2 bit designed for smooth operation in autofeed screwdriver- Minimizes screw jamming by precise application. Also a very useful long length bit for use with impact driversSpecifications:Diameter (D) - 6 mmOverall Length - 127 mmScrew Head - PH2 Model - BFR440 Application:Drywalling, plasterboard, screwdriving, decking, drylining

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Molybdenum, drop-forged, deep WallDrive® impact socket.• Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance.• Ideal for use with air impact wrenches.• Lifetime guarantee*.Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. Hardened and tempered for added strength, with phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches.• Chrome Molybdenum, drop-forged, deep WallDrive® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches. • Lifetime guarantee*. …

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Drop-forged steel extension bar.• Suitable for use on all types of air impact tool.• Chrome Molybdenum steel with phosphate finish for added corrosion resistance.• Spring-ball socket retainer and drilled head to accept retaining pin.• Lifetime guarantee*.Drop-forged Chrome Molybdenum steel extension bar. Suitable for use on all types of impact tool. Phosphate finish for added corrosion resistance. Spring-ball socket retainer and drilled head to accept retaining pin.• Drop-forged steel extension bar. • Suitable for use on all types of air impact tool. • Chrome Molybdenum steel with phosphate finish for added c…

Content: 60 pieces
Fits perfectly into drawers of workshop trolley Metal code stmt1 – 74306
Part of the trans module Workshop trolley system
Rubber overmould is long lasting and slip resistant
Chrome Vanadium Steel Reversible Ratchet with Quick Release Locking System of the bushing and button
'Bullet' face provides greater impact force
Multi core construction with high-impact polypropylene jacket

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 30 • Dia Imperial: 1 3/16 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Includes 3 extra bearings. Tool creates rebates 7.9mm, 9.5mm, 11.1mm & 12.7mm. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 62.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 11

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Includes 3 extra bearings. Tool creates rebates 7.9mm, 9.5mm, 11.1mm & 12.7mm. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7 • Rebate Metric: 11

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 57 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 63.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 32 • Overall Length Metric: 74 • Bearing Dia Metric: 9.5

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 102 • Overall Length Imperial: 4 1/64 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Angle: 90

Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 60 • Radius 1 Metric: 10

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 41.5 • Bearing Dia Metric: 9 • Radius 1 Metric: 3.2

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

TCT Two flute cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Features and Benefits: Two flutes give a clean finish to cut edges TCT plunge centre tip

Tungsten carbide tipped boring bit with centre point, two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 15 • Overall Length Metric: 57.5 • Type or Grade: RH

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 15 • Overall Length Metric: 57.5 • Type or Grade: LH

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 55 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Rebate Metric: 6