only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Bits & Sockets Sets

 prices on 17116 models  
£60
clear
Save List
Show
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28.5 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8
from £53.95
Compare prices and buy Trend CRAFTPRO Radius Bearing Guided Router Cutter 28.5mm 14.3mm 1/4" C062
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow radius. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2
from £53.95
Compare prices and buy Trend CRAFTPRO Radius Bearing Guided Router Cutter 34.9mm 19.1mm 1/2" C063
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 6.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Tongue and Groover Router Cutter Set 41mm 6.35mm 1/4" C158X
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 6.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Tongue and Groover Router Cutter Set 41mm 6.35mm 8mm C158X8
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Tongue and Groover Router Cutter Set 41mm 6.35mm 1/2" C158X
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
You may be interested in
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2.5 • Overall Length Metric: 80 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 2.5mm 1/2" C211X1/2T
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2.8 • Overall Length Metric: 80 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 2.8mm 1/2" C212X1/2T
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 3 • Overall Length Metric: 80 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 3mm 1/2" C213X1/2TC
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accept a weatherseal. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2 • Overall Length Metric: 80 • Bearing Dia Metric: 22
from £53.95
Compare prices and buy Trend CRAFTPRO Weatherseal Groover Router Cutter 36mm 2mm 1/2" C210X1/2TC
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature stops break out on top edge. Has a 3 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 107
from £53.95
Compare prices and buy Trend Down Cut Shear Two Flute Router Cutter 12.7mm 50mm 1/2" 53/83X1/2TC
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
Two flute helical up-cut cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Specifications: • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 40 • Overall Length Metric: 100 • Type or Grade: Up-cut
from £53.95
Compare prices and buy Trend HSSE Spiral Upcut Non Ferrous Metal Router Cutter 5mm 40mm 8mm 50/33
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19 • Overall Length Metric: 51
from £53.95 up to £63.99 
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 25.4mm 19mm 1/4" 4/08X
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Zoro.co.uk (United Kingdom) →
£64.00
Compare prices3→
All articles about bits / sockets
Screwdrivers and drills for dummies
What is the best screwdriver?
Sparks, smoke, crunch and burning smell: what can break in a drill or screwdriver
What to give to a motorist?
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 57
from £53.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 13mm 26mm 1/4" 4/0X1/4
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 57
from £53.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 15.9mm 25.4mm 1/4" 4/2
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72
from £53.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 13mm 26mm 1/2" 4/0X1/2
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19 • Overall Length Metric: 60
from £53.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 25.4mm 19mm 1/2" 4/08X
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 66
from £53.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 15.9mm 25mm 1/2" 4/26X
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Compare prices2→
For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 24000 RPM. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 12 • Overall Length Metric: 45 • Angle: 90
from £53.95 up to £58.95 
Compare prices and buy Trend Trimmer Router Cutter 18mm 12mm 1/4" 47/2X1/4TC
Tooled-up.com  →
£54.00
Mytoolshed.co.uk (United Kingdom) →
£54.00
Tooled-up.com  →
£59.00
Mytoolshed.co.uk (United Kingdom) →
£59.00
Compare prices4→
A 40pc bit set designed for the automotive engineer with Star, Spline and Hex bits. Includes 3/8"D and 1/2"D socket drivers: Star bits x 30mm T20 | T25 | T30 | T40 | T45 | T50 | T55, Star bits x 75mm T20 | T25 | T30 | T40 | T45 | T50 | T55, Spline bits x 30mm M5 | M6 | M8 | M10 | M12, Spline bits x 75mm M5 | M6 | M8 | M10 | M12, Hex bits x 30mm 4mm | 5mm | 6mm | 7mm | 8mm | 10mm | 12mm, Hex Bits x 75mm 4mm | 5mm | 6mm | 7mm | 8mm | 10mm | 12mm. Spare bits available. Complete with 2 adaptors 3/8"D & 1/2"D.Replacement parts for all sizes availableIncludes 3/8" & 1/2" drive adaptors.Designed for the automotive engineer.Manufactured from Silicon Steel.Complete in a metal storage case for easy selection.…
£53.90
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Bits / Sockets Stanley FatMax FMMT98101-0
Stanley FatMax FMMT98101-0
FatMax
Kit:bit 30 pcs, socket heads 12 pcs
Bits:SL, PH, PZ, T, TH, H
Socket heads:6-points
Landing square:1/4 "
In box:adapter, ratchet wrench, extension, universal joint
Photos 12Prices 2
from £53.86 up to £57.82 
Compare prices and buy Stanley FatMax FMMT98101-0
PowerToolsDirect.com (United Kingdom) →
£58.00
Idealo.co.uk (United Kingdom) →
£54.00
Compare prices2→
Bits / Sockets Sealey AK66722
Sealey AK66722
Kit:socket heads 24 pcs
Bits:standard and deep
Socket heads:6-points
Landing square:3/8 "
In box:ratchet wrench
Photos 4Prices 7
IRWIN® HSS Cobalt Drill Bits are perfect for drilling stainless steel and other high alloys. Their 135° split point grinding ensures perfect centring and reduced drilling pressure. An industrial quality ground flute ensures high accuracy drilling and fast removal of chips. The drill bit body is manufactured from high-quality HSS steel containing 5% cobalt (Co). The added 5% cobalt improves the red hardness (heat resistance) of the drill bit and results in significantly extended life. It has an attractive golden tempered surface finish. This 15 Piece Set contains the following sizes: 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 8 9 10mm.PTDIRWIW3036501
£53.62
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Bits / Sockets Sealey AK6926
Sealey AK6926
Kit:socket heads 12 pcs
Bits:standard
Socket heads:6-points
In box:ratchet wrench, extension
Photos 9Prices 6
Manufactured from Chrome Vanadium steel. Contains a selection of vehicle specific sockets and bits for the removal of brake caliper bolts.11pc Brake Caliper Socket Set• Manufactured from Chrome Vanadium steel.• Contains a selection of vehicle specific sockets and bits for the removal of brake caliper bolts.• Contents: Hex Bits; 7 8 9mm Hex Socket Bits; 7 x 65 7 x 92 9 x 50 11 x 100mm Sockets; 10-point Ø11.5mm 10-point Ø15mm 10-point Ø20mm 7-point Ø22mm.• Model No. VS0465Model No: VS0465:Application(s): AudiPTDSEAVS0465
£53.62
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
24 more item(s)
1 ... 15 16 17 18 19 ... 714
Filters
Price
from£ up to£ 
Brands
Set
Items in set
Landing square
Bits included
Socket heads included
More features
Bit length
Socket depth
Got ideas or questions about filters? Click here!
Models