Bits & Sockets Sets

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Roun more→d Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.

Two flute for fine finish. Specially ground for cutting acrylic. Can be used on phenolic resin. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • more→Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the lengt more→h of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/2in

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A more→slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 8 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 12.7

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A more→slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 12 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7

Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • more→Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 8 mm • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • more→Bearing Dia Metric: 9.5 • Radius 1 Metric: 4

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric: 18 • Overall Length Metric: 69.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 8 mm • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • more→Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 6.3

Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • C more→ut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 9.5

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Overall Length Metric: 79

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 35 • Overall Length Metric: 81

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Overall Length Metric: 57

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 18 • Dia Imperial: 45/64 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3 more→612BR, Ryobi and Hitachi routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 50 • Overall Length Metric: 84 • Type or Grade: Shorter shank

Trend TR47X1/2TC Roman Ogee 4mm Radius x 15.9mm Cut The Trend TR47X1/2TC Roman Ogee features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials and give extra long life. Fea more→tures:
- PTFE coated, indicated by distinctive black colouring
- Can be used on hardwood & softwood, fibreboard, plywood and particle board
- Etched dimensions on extra long 40mm shanks, for quick identification
- By raising the cutter, the top quirk is removed  Specification:
- D1:  25.4mm
- C:  5/8 Inch
- C:  15.9mm
- OL:  64mm
- B:  9.5mm
- R1:  4mm
- Shank Diameter:  1/2 Inch

All - round set comprising seven sizes of tap (taper, secondary and bottoming) and seven HSS drills. Packed in case with display sleeve.

¼” hex shank
Easy to carry, heavy duty plastic stackable case
Ideal Product