Bits & Sockets Sets

Trend Craft Pro 1/2in shank Intumescent strip cutter - 10mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent more→strip. Bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. 1/2in shank, for heavy duty work with bigger routers. Position of groove can be altered with the router plunge for correct setting for 30 minutes fire and smoke protection." PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: …

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 12.7mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all tim more→ber and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 12.7mm radius will cut full bullnose profile for detailing work on 1in/25mm stock. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: …

Trend Professional 1/2in shank bearing guided pierce and trim cutter - 12.7mm diameter for laminate work 12.7mm diameter X 30mm cutting length pierce and trim cutter for flush cutting apertures in wo more→rktops cleanly. 1/2in shank cutter perfect for heavy duty trimming work to bring laminate flush on internal apertures for sinks, hobs and other similar applications. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 …

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping&rsquos and plastic laminate edges. Features 2mm micro grain tungsten carbide t more→ips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications Shank 1/2in. Cutting Diameter 12.7mm. Cutting Length 25.4mm.

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, more→indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 12 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 105

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications: • Shank Diameter: 1 more→/4 • Dia Metric: 20 • Cut Length Metric: 14 • Overall Length Metric: 57 • Angle: 80

Trend Craft Pro 1/2in shank bearing guided chamfer cutter - 51mm diameter Two Flute Carbide tips. 1/2in shank with 19.1mm cutting depth for heavy duty work, architectural joinery and general chamferi more→ng work. 45¡ bearing guided chamfer profile follows straight and curved profiles for crisp, professional detailing work on an edge. Ideal for table use to cut mitred corner joints for box making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length M…

Trend Craft Pro 1/2in shank bearing guided round over router cutter - 12.7mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all tim more→ber and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 12.7mm radius will cut full bullnose profile for detailing work on 1in/25mm stock. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 8 mm • Dia Metric: 38 • Dia Imperial: 1 1/2 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 70.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Panel mould and edge mould cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 8 • Overall Length Metric: 36.6 • Radius 1 Metric: 12

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11.8 • Ov more→erall Length Metric: 48.9 • Bearing Dia Metric: 9 • Radius 1 Metric: 4.8

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19 • Overall Length Metric: 50

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 24 • Dia Imperial: 61/64 • Cut Length Metric: 19 • Overall Length Metric: 59

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 21 • Dia Imperial: 53/64 • Cut Length Metric: 19 • Overall Length Metric: 59

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 24 • Dia Imperial: 61/64 • Cut Length Metric: 19 • Overall Length Metric: 50

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 15 • Dia Imperial: 19/32 • Cut Length Metric: 35 • Overall Length Metric: 76

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Short shank for Makita 3600B & 3 more→612BR, Ryobi and Hitachi routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100

Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Specifications: • Shank Diameter: more→1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 80 • Angle: 87

• Three high-speed HSS 4341 double flute step drills.• Double straight flutes for efficient swarf clearance.• Allows clog-free, precision drilling of 18 different size holes with just three bits.• Siz more→e #1: ø4-12mm.• Size #2: ø4-22mm in 2mm increments.• Size #3: ø4-30mm in 2mm increments.• Supplied in flip-up metal case.Three high-speed HSS 4341 double flute step drills. Double straight flutes for efficient swarf clearance. 18 Sizes covered by three drill bits. Supplied in flip-up metal case.• Three high-speed HSS 4341 double flute step drills. • Double straight flutes for efficient swarf clearance. • Allows clog-free, precision drilling of 18 different size holes with just thre…