Bits & Sockets Sets

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imper more→ial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 57 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imper more→ial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 63.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 32 • Overall Length Metric: 74 • Bearing Dia Metric: 9.5

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length more→Metric: 50 • Overall Length Metric: 102 • Overall Length Imperial: 4 1/64 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Angle: 90

Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Length Metric: 60 • Radius 1 Metric: 10

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15 • Cut Length Metric: 9.5 • Cut more→Length Imperial: 3/8 • Overall Length Metric: 41.5 • Bearing Dia Metric: 9 • Radius 1 Metric: 3.2

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 25 • Overall Length Metric: 65

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 25 • Overall Length Metric: 56

Tungsten carbide tipped boring bit with centre point, two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a more→cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 15 • Overall Length Metric: 57.5 • Type or Grade: RH

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneere more→d). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 15 • Overall Length Metric: 57.5 • Type or Grade: LH

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: more→1 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 55 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Rebate Metric: 6

23 piece 1/4 inch drive socket set containing 6 point sockets
Socket sizes: 4, 5, 5.5, 6, 7, 8, 10, 12, 13mm
4 adjustable wrench, 2 extension, 1/4 inch mini bit ratchet, 1/4 male:1/4 hex more→adaptor
1/4 inch hex bits: 4, 5,5, 6.5mm flat, PH1, PH2, PZ1, PZ2TX10, TX15, TX20
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• more→Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS042Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.090kgSize: 9mmDimensions: Length: 30mm x Height: 50mmWeight: 0.096KgWarranty: Life

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Vanadium 6150 steel bits, each size in 30 and 75mm lengths.• Hardened and tempered for added strength more→.• Set includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.• Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Security TRX-Star* Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Ribe Bits; M5, M6, M7, M8, M9, M10, M12, M14 (1 each 30 & 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive Adaptors; 3/8"Sq x 10mm Hex, 1/2"Sq x 10mm Hex.• Supp…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…