Bits & Sockets Sets

Designed to fit the Stanley roller cabinet range.
Includes a pear head ratchet made from chrome vanadium steel with a bi-material handle.
27 sockets included, 8-22mm in deep and normal r more→each sockets.
Package Weight: 2.62 kilograms
Package Dimensions: 5.2 L x 43.2 H x 18.6 W (centimeters)

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Roun more→d Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.

Trend Craft Pro 1/4in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials. Supplie more→d with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications. 1/4in shank , ideal for easy control on smaller, intricate work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length …

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the lengt more→h of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/2in

Solid Carbide rasp/burr. Coarse cut. For grinding, carving and shaping of glass reinforced plastics (GRP). Not suitable for plunge cutting. Use at speed 10000 -30000 RPM. Specifications: • S more→hank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 20 • Overall Length Metric: 51

Trend 6.35mm diameter down cut spiral cutter - 8mm shank, 25.4mm cut length. Spiral downcutting configuration offers the cleanest finish on the top surface of the workpiece when used in hand held or more→overhead CNC routing applications. Two flute design is ideal for superior crosscutting performance in all timbers and on veneered sheet materials. Spiral design offers clean plunge cutting with reduced vibration under load for premium finishes. 1/4in wide x 1in cut depth Imperial size for matched size to imperial sheet stock and fittings. Chips are forced downwards as the cut is made so require a lower feed speed. Ultra-durable Solid Tungsten Carbide construction for increased performance and …

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.35 • Dia Imperial: 1/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 63 • Overall Length Imperial: 2 1/2 • Type or Grade: Up-cut

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softw more→ood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. By raising the cutter, the top quirk is removed. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 4

For deep mortising & grooving giving good chip clearance. Will plunge to a depth of 70mm in a number of passes. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive material more→s to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Cut Length Metric: 50 • Overall Length Metric: 101

For deep mortising & grooving giving good chip clearance. Will plunge to a depth of 70mm in a number of passes. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive material more→s to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 12 mm • Dia Metric: 16 • Cut Length Metric: 50 • Overall Length Metric: 101

Two flute for fine finish. Specially ground for cutting acrylic. Can be used on phenolic resin. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • more→Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A more→slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 8 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 63.5 • Bearing Dia Metric: 12.7

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A more→slightly longer cut than the length of the biscuit is required for ease of alignment during assembly. Specifications: • Shank Diameter: 12 mm • Dia Metric: 37.2 • Cut Length Metric: 4 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7

Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • more→Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 8 mm • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 65.5 • more→Bearing Dia Metric: 9.5 • Radius 1 Metric: 4

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Dia Imperial: 1 3/8 • Cut Length Metric: 18 • Overall Length Metric: 69.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 12.7 • more→Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 6.3

Ovolo cutter designed for sash bars but useful for decorative edging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • C more→ut Length Imperial: 5/8 • Overall Length Metric: 56 • Radius 1 Metric: 9.5

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Overall Length Metric: 79

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.