Bits & Sockets Sets

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

For window boards 25mm thick. Two passes create shallow nosing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 23.7 • Cut Length Metric: 19 • Overall Length Metric: 50.1 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 42

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut. This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications Tooling TCT. 1/4in Shank. By changing the bearing, the size of the rebate can be altered, It is supplied with 3 bearings. 22.0 mm bearing gives rebate of 1 mm. 19 mm bearing gives rebate of 2.5 mm. 16 mm bearing gives rebate of 4 mm. D = 24 mm. C = 12.7 mm.

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument production, when a small rebate is required for insertion of purfling. When using bearing Ref. B95A, make two passes when a full depth of cut is required by using a larger bearing first. Specifications: • Shank Diameter: 8 mm • Dia Metric: 24 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.5 • Bearing Dia Metric: 22 • Rebate Metric: 4

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric: 12.5 • Overall Length Metric: 52 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 8

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24.6 • Cut Length Metric: 18.5 • Overall Length Metric: 58 • Bearing Dia Metric: 12.7

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44 • Cut Length Metric: 19 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 18 • Overall Length Metric: 56.1 • Radius 1 Metric: 12.7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Overall Length Metric: 66

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 32 • Overall Length Metric: 80 • Bearing Dia Metric: 19 • Radius 1 Metric: 9.5

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards. TC. 1/2in Shank R = 12.7 mm D = 25.4 mm C = 15.9 mm

Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards. Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time. Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life. Downcut for better clamping when machining small workpieces and improved finish on the tops of the board. For use on routers and CNC routers. Up-cut spiral and can be used to plunge cut. Eject chips up or down depending on tool …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…