Bits & Sockets Sets

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 6mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 8mm shank router cutters.

• Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.• Designed to rotate cranksh more→aft on Mercedes commercial vehicles via flywheel ring gear. • Model No. CV038Technical Specification:Application(s): Mercedes; OM457, OM541, OM542, OM902, OM904, OM906, OM924, OM926, MAN; D25, D28Drive: 1/2"SqNett Weight: 0.41kgDimensions: Length: 95mm x Height: 80mmWeight: 0.84KgWarranty: 1 year

Self guided tools for trimming inlay or overlaps. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperi more→al: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 28.6

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Lengt more→h Metric: 15 • Overall Length Metric: 66 • Angle: 45

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 70.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 10

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneere more→d). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 30 • Overall Length Metric: 57.5 • Type or Grade: RH

The step drill bit is made of HSS (high-speed steel) and coated with AlTiN (Aluminium Titan Nitride). It thus offers the maximum lifetime possible and does not require the use of a coolant. Easily vis more→ible and durable markings of the hole diameter are provided by laser-marked figures in both spiral flutes. In addition, the 3-flat shank prevents slipping in the chuck and also provides powerful high-torque transmission. The HSS Step Drill Bit performs smooth, burr-free drilling in several diameters with one drill bit. It is ideal for deburring, for drilling round holes and for enlarging existing ones. Pre-punching is not necessary, because the split-point tip allows for an easy start. Its CNC ground …

Square drive as per DIN 3120 - D 25, ISO 1174, with locking pin Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated * not standardised

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resist more→ant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Size 14mm x 1.5Length 1 1/2 x Diameter