Bits & Sockets Sets

Ideal for fast chamfering to remove edge on timber or create a decorative edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Overall Length Met more→ric: 62 • Bearing Dia Metric: 9.5 • Angle: 45

Set for use by kitchen fitters comprising two 1/2-inch diameter x 50mm cut length Tungsten Carbide Tipped worktop router cutters, ten No.20 biscuits and six metal panel bolt connectors. Gives a clean more→finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Cut Length Metric: 50 • Pack Qty: 18 piece Contents: 2 x BR01X1/2TC 10 x BSC/20 6 x PC/01/M

Can be used with a majority of routers on the market. The bar fits into one of the the holes for the router side fence. They have a pivot point which is adjustable in height.

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63

A single fluted high steel cutter for pierce and trimming of aluminium faced panels in the caravan industry. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 more→• Cut Length Metric: 19.1 • Overall Length Metric: 76

Cuts groove for Trend Routaseal. Position seal into apex of jamb and stop. More economic to use than more complex seals. Use with a small 1/4 inch shank hand router. Use STC for abrasive material. more→Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 3 • Overall Length Metric: 61 • Angle: 115

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 19 • Overall Length Metric: 51

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63.31 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/2 x 1/2 TCT Two Flute Cutter has the following specification D 16mm (5/8in) C 19mm OL 60mm Shank Diameter 1/2in

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 9.5 • Cu more→t Length Imperial: 3/8 • Overall Length Metric: 50 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 6.35

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.7 & more→bull; Radius 1 Metric: 4

A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage more→. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 22 • Overall Length Metric: 95 • Type or Grade: Two flute

Constructed from heat treated S2 special steel for durability and longer service life
87 impact black bits with lengths of 25mm and 50mm
Precision made tips to ensure a perfect hold  more→/> 1/4" hex shank
Contains 25mm bits: PH1 x 5, PH2 x 10, PH3 x 5, PZ1 x 5, PZ2 x 10, PZ3 x 5, TX15 x 6, TX20 x 6, TX25 x 6 and TX30 x 6
50mm bits: SL5.5, PH1, PH2 x 4, PH3 x 2, PZ1, PZ2 x 4, PZ3 x 2, TX15 x 2, TX20 x 2, TX25 x 2 and TX30 x 2
6mm magnet nut runner
Magnetic bit holder