Bits & Sockets Sets

Reisser ZENTRO 4-Cutter SDS-max hammer drill for reinforced concrete and hard aggregates For electric hammers utilising the SDS-max tool holder system. SDS-max 4-Cutter Hammer Drill Bit45.0mm Diameter more→Overall length: 570mmPTDREI450540

DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power toolsBlack phosphate finish for easy identification as an impact socket accessoryRing and pin fixing hole more→on the female end to secure the socketPlease note image used is representative for the 1-1/2" Drive range of Teng impact sockets

Soft Module System thermoformed tray of tools. Suitable for all Beta roller cabs and trolleys (C1 or C2)Dimensions of tray: Height: 50mm Width: 367mm Length: 147mmContents:851SR - magnetic bit holder more→with handle 230 mm860LP - bits for slotted head screws, coloured: 0.5 x 3 | 0.6 x 4.5 | 0.8 x 5.5 | 1 x 5.5 | 1.2 x 6.5 mm860PE - hexagon bits for power drivers, coloured: 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 mm860PH - hexagon bits for power drivers, coloured: 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 mm860PZ - bits for cross head Pozidriv - Supadriv screws, coloured: PZ1 | PZ2 | PZ3 | PZ4860TX - bits for Torx head screws, coloured: T6 | T7 | T8 | T9 | T10 | T15 | T20 | T25 | T27 | T30 | T40860RTX - bits for …

Screwdriver bit socket set 1/2" in 1/3 Check-Tool module

Torque Screwdriver 1/4" 1-4 NM

Get professinal quality with the Elora 870 JMU Metric Socket Set which has been manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316 and DIN 3124/ISO 2725 specifications. Packed in more→heavy gauge steel storage case with plastic insert.

Expert Quality 6 point socket manufactured from chrome vanadium steel which is correctly hardened and tempered with a micro satin chrome plated finish. Each socket has a knurled ring for extra grip. more→Supplied with 72 tooth reversible soft grip ratchet and accessories. Supplied complete in a two tone full drawer EVA insert tray made from closed cell foam. Suitable to be used in Draper and Draper Expert roller cabinets and other manufacturers similar roller cabinets.PTDDRPDIR63537

3/8D sockets: 1 x standard socket: 22mm; 2 x deep sockets: 10, 13mm. Professional ratchet 3/8D. 2 x 3/8D extension bars: 3, 6.Combination spanners: 2 x 10mm, 2 x 13mm, 2 x 17mm, 1 x 19mm. Combination more→pliers 160mm, side cutters 160mm.6 x assorted screwdrivers: Flat 3mm x 75mm, 4mm x 80mm, 6.5mm x 150mm; PzDrive Pz0 x 75mm, Pz1 x 80mm, Pz2 x 100mm; 1 x stubby screwdriver: Flat 6mm x 38mm.Twin (rubber & steel) face hammer 16oz; 6 x T-handle hex & ball end keys: 3, 4, 5, 6, 8, 10mm; spark plug socket 3/8D - 21mm Single Hex; spring hook.2 x steel rules: 300mm; metric feeler gauge set; tape measure 3m (metric/imperial); T20 star screwdriver, shaft length: 100mm.

Set of 7 special form socket drivers (item 920ES) on support. Sizes: 7-9-10-11-12-14-16mm

Quick release and twist reverse action for easier useSliding T bar and 16" (400mm) extension also includedTools are held in place using three colour pre-cut EVA foam clearly showing where each tool be more→longDesigned and manufactured to DIN and ISO standards