Car Amplifiers

Rms power 4o: 50 watts x 4 2o: 75 watts x 4 Peak power: 600 watts Signal sensing turn-on

Plug and play. HUD can auto adapt to vehicle type which in line with OBDII or EUOBD(On-Board Diagnostic System).Comprehensive display. HUD can display many parameters at the same time as follows, vehicle speed, engine speed, water temperature (voltage, throttle valve position, ignition advance angle, time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure.Diversiform display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.Free switch. Km and mile can be switched freely to meet the need of each .Suitable size. The display area is 5.5 inches which is very clear for driver to read data.Automatic power on and off. Starting …

Condition: 100% New Fitment Type: Direct Replacement Part Number: 84102447710,2447710,84109361678 Colour:As Shown Material:Electrolytes Fitment: For 1' F20 (07/2010 02/2015) 1' F20 (05/2014 06/2019) 1' (07/2010 02/2015) 1' (05/2014 06/2019) 1' F40 (05/2018 12/2019) 2' F22 (10/2012 06/2017) 2' F22 (09/2016 12/2019) 2' F87 M2 (11/2014 06/2017) 2' F87 M2 (09/2016 12/2019) 2' F23 (03/2014 06/2017) 2' F23 (11/2016 12/2019) 2' F44 Gran Coup (10/2018 12/2019) 2' F45 Active Tourer (11/2013 02/2018) 2' F45 Active Tourer (04/2017 12/2019) 2' F46 Gran Tourer (07/2014 03/2018) 2' F46 Gran Tourer (05/2017 12/2019) 3' F30 (02/2011 07/2015) 3' F30 (09/2014 10/2018) 3' F80 M3 (01/2015 10/2018) 3' G20 (10/2017 …

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

Features:1¡¢The volume is adjustable, turn the adjustment button to the right to increase the volume, turn the adjustment button to the left to decrease the volume. 2¡¢With anti-reverse protection, short-circuit protection and over-temperature protection. 3¡¢With Bluetooth 5.0 version, the effective transmission distance is 10?15 meters/32.8?49.2 feet. 4¡¢Suitable for various installation conditions, better audio performance, suitable for your home or car music system. 5¡¢Wide range of applications and is suitable for operation by college students, engineers and technicians.Package included:1 x Power Amplifier Module

Lightweight, has a matt silver casing and allows for full control of your volume, treble and bass output. It also has a jack for plugging your MP3, MP4. Features: Fine quality stereo sound and heavy bass output. With MP3, MP4 input jack. Low distortion. Nice for use on your vehicle or your home. All aluminum, the surface of machine made by wire drawingoxidation process. Adjust the high and low frequency separately, let you find your favorite frequency band. Specifications: Color: silver Material: aluminum alloy Resolution: 47K Impedance: 4-8 Ohm Power: 20W+20W Distortion: 0.4percent Item size: 150 * 90 * 35mm / 5.9 * 3.5 * 1.4in Item weight: 270g / 9.5ounce Package size: 160 * 135 * 45mm …

Anti-Noise Ground Loop-Isolator Noise Filter Eliminator- Ground Loop- Suppressor Noise Isolation Car Radio-Audio Systems OOTDTY Features: Eliminate the noise caused by car subwoofers, etc. Improve sound quality to generate better sound effect. Made of high quality plastic, wearable and durable-. Isolate and eliminate noise caused by a ground loop in an circuit with this ground loop Isolator-. The isolator- ensures that the shield- ground on each cable is isolated from any equipment ground, which could cause audible noise when amplified. Specifications: Material: ABS Size:Approx.6.5x3.5cm/2.55x1.37inch Package Includes: 1x Noise Filter note: 1.Please allow 1-2cm errors due to manual measurement,…

Monoblock Class D Subwoofer Amplifier, 250 W x 1 @ 2 Ω / 150 W x 1 @ 4 Ω - 14.4V

1. The capacitor cooperates with the transfer charge pusher, the balance board is connected to the battery, and the balance is started.2. new ultra-low internal resistance MOS, 2OZ copper thick PCB3. Balance current 0-5.5A, the more balanced the battery, the smaller the current, with manual sleep switch, sleep current4. The current mode is less than 0.1mA, and the balance voltage accuracy is within 5mv!5. Quiescent current is about 12mA. The recommended battery capacity is 60-300AH.With under-voltage sleep protection, it will automatically stop when the voltage is lower than 3.0V, and the standby power consumption is less than 0.1mA.Applicable to all devices suitable for ternary lithium, lithium …

Package Included: 1 x Audio Amplifier 1 x Remote Control Specifications: Colo: Black Model: BT-298A Input voltage: AC 220V/ DC12V(in car) Plug: US plug(sent with an adapter according to your country) Bluetooth: Support Output power: 80W+80W Peak power: 300W+300W Channel: 2 CH Load impedance: 4-16Ω SNR: >92 db FM frequency: 87.5-108MHz Distoration rate: 0.05% Frequency: 10Hz-20KHz Sensitivity: 0.25mV-220mV RC power supply: CR2052 battery(built-in) Size: Approx. 18x15.5x5.5cm/ 7.08x6.10x2.17'' Features: -Mini HIFI digital Bluetooth audio power amplifier. -Built-in LCD display, with backlight function. -SD Card, U disk, MP3 format play, support Bluetooth wireless connection. -Supports FM

Four Channel Power Amplifier with class D digital technology for glass tone Aluminum housing for optimum heat dissipation Adjustable input sensitivity (0.2 power supply: 3 V-5 V Power supply with Mos FET Power transistors Box contents: Kenwood W/M1804, DC Cable, RCA cable (2x), thread screws 4x16 (4x), cable ties (2x)