Bits & Sockets Sets

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted.

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, more→indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Comes in a re-usable clear tube for protection. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 12 • Overall Length Metric: 60 • Type or Grade: Up-cut

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 12 • Overall Length Metric: 60 • Type or Grade: Up-cut

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 14 • Overall Length Metric: 80 • Type or Grade: Up-cut

Can be used with a majority of routers on the market. The bar fits into one of the holes for the router side fence. They have a pivot point which is adjustable in height.

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length more→Metric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 12.7 • Angle: 90

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metr more→ic: 15 • Cut Length Imperial: 19/32 • Overall Length Metric: 58.5 • Radius 1 Metric: 9.5

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm d more→epth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 3/03 x 1/4 TCT Two Flute Cutter has the following specification D 4.5mm C 11mm OL 51mm Shank Diameter 1/4in

V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 39 • Overall Length Metric: 69

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 58

The shape of the T-handle allows a transmission of particularly high tightening and loosening torque. The geometry of the handle fills the hand well and the fingers lie safely in the soft rounded hand more→le recesses. This ensures optimal, ergonomic power transmission. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Only allowed for 3/8" VDE bit sockets and sockets of the Wera Zyklop VDE series 8740, 8760, 8767, 8790. The coated handle protects even sensitive surfaces from damage. Features and Benefits: • 3/8" VDE T-handle screwdriver for the transmission of particularly high tightening and loosening torque • Ergonomic 2-component …

The Wera 868/1 IMP DC Impaktor Square-Plus 25mm Bits ensure an above-average service life even under extreme conditions thanks to a best-possible utilisation of the material properties and optimally d more→esigned geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. For best results, use with the IMPAKTOR Tri-Torsion bit holder. Suitable for DIN 3126-D 6.3, ISO 1173 bit holders.

The Wiha BitBuddy® TY Bit Set 8 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered pro more→file size on the bit base ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to …

The Wiha FlipSelector Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. Bits conform to DIN 3126, ISO 1173, Style C6,3. The FlipS more→elector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 1 x 25mm Standard Slotted Bit 5.5mm. 1 x 25mm Standard Phillips Bit PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 4 x 25mm Standard TORX® Bits: T15, T20, T25 & T30. 3 x 25mm Standard Hexagon Bits: 3.0, 4.0 & 5.0mm. 1 x Magnetic Bit Holder 58mm.…

The Irwin Impact Screwdriver Bits are specifically designed for use in high torque impact drivers. They are manufactured from heavy-duty, high-grade steel and have a 3 times increased life compared to more→standard screwdriver bits. Their precision tip geometry delivers superior fitment, reducing stripping and cam-out. The bits are Power Groove designed for compatibility with IRWIN Impact Performance Series magnetic screw-hold attachment. This set contains the following 7 x 25mm Phillips Bits PH1(x2), PH2(x3) and PH3(x2). 7 x 25mm Pozidriv Bits PZ1(x2), PZ2(x3) and PZ3(x2). 7 x 25mm TORX Bits T20(x3), TX25(x2) and T30(x2). 5 x 50mm Phillips Bits PH2. 5 x 50mm Pozidriv Bits PZ2. 1 x 3in Bit Holder.…

The Bahco 59/S36BCR Ratcheting Coloured Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. TORX bits are colour coded to easily i more→dentify the size of the tip. Supplied in a durable carry case. Contains 5 x 25mm Phillips Bits PH0, PH1, PH2, PH3 and PH2G. 4 x 25mm Pozidriv Bits PZ0, PZ1, PZ2 and PZ3. 7 x 25mm TORX Bits TX10, TX15, TX20, TX25, TX27, TX30 and TX40. 3 x 25mm Slotted Bits 4.5, 5.5 and 6.5mm. 8 x 25mm Hexagon Bits 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm. 6 x Magnetic Nut Drivers 6, 7, 8, 10, 11 and 13mm. 1 x 1/4in Socket Adaptor. 1 x KM653 Magnetic Universal Bit Holder. 1 x Ratcheting Screwdriver Handle.

Expert Quality, manufactured from chrome vanadium steel hardened and tempered with a polished finish. Spring - loaded ball bearing for secure socket holding. Sold loose.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Forged Chrome Vanadium steel extension.• Hardened, tempered and chrome plated for corrosion resistance.• Fit more→ted with spring-ball socket retainer.• Lifetime guarantee*.Forged Chrome Vanadium steel extension. Hardened, tempered and chrome plated for corrosion resistance. Fitted with spring-ball socket retainer.• Forged Chrome Vanadium steel extension. • Hardened, tempered and chrome plated for corrosion resistance. • Fitted with spring-ball socket retainer. • Lifetime guarantee*. • Model No. S34/E400Technical Specification:Drive: 3/4"SqLength: 400mmMaterial: Chrome VanadiumNett Weight: 1.34kgDimensions: Le…