Bits & Sockets Sets

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

Furniture and kitchen assembly.
Installation of fittings, back walls, strips
Mounting doors and windows.
Screw work in wood, metal and plastic.
Fences, pergolas, carports, canopies.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Designed for use with a standard ratchet or breaker bar.• Ideal for work around the engine bay and the tight more→ening of wheel nuts to factory specifications.• Large LCD display with LED/audible alarm indicating achieved and target torque levels.• Selectable readings in Nm, lb.ft, lb.in or kgf.m.• Accurate to ±2% of stated capacity and operates in either direction.• Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences.• Will also accumulate angle measurement when multiple turns are required, ideal for use wh…

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications: &b more→ull; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90

Two flute helical cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used more→with a coolant, wax stick or lubricant. Material should be securely clamped. Specifications: • Shank Diameter: 8 mm • Dia Metric: 8 • Cut Length Metric: 20 • Overall Length Metric: 63 • Type or Grade: Up-cut

A routing template that allows a router to create a 26mm or 35mm diameter blind hole recess for a circular cabinet door hinge. Cuts an accurate recess for either 26mm or 35mm circular hinges. Adjust more→able alloy edge guide for adjustment of recess position from top or bottom of door. Removable alloy edge guide for middle hinge recess. 3mm and 5mm location holes to accurately position the recesses relative to the edge of the door. Engraved centre sight lines. Pin holes reversible for left hand and right hand doors. Made from hard wearing 12mm thick high pressure laminate. Requires 12.7mm diameter cutter, 30mm guide bush and two 100mm throat F-clamps. Contents: 1 x Sliding stop 4 x ABS …

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • S more→awbore: 12 • Saw Kerf Metric: 10 • Saw Teeth: 4

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 12 • Overall Length Metric: 66.5 • Radius more→1 Metric: 6

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving acce more→ssory with locking pin. Sold loose.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Socket Set / 12 Number of Items

Fast release button^Chrome vanadium steel for quality, strength and performance^Stylish satin chrome finish - easy to clean

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications: • Shank Diamet more→er: 1/2 • Dia Metric: 22.5 • Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19 • Angle: 2

For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 33 • Overall Lengt more→h Metric: 71 • Angle: 45

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Met more→ric: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …