Bits & Sockets Sets

A template that enables 60mm and 80mm round and 105mm x55mm rectangular holes, to be routed in desks or any surface where cables need to be hidden. The holes will then accept a plastic cable tidy. The more→template can also be used to cut a 35mm blind hole for circular kitchen door hinges. A 30mm diameter guide bush and a 12mm diameter cutter are required. A Unibase may be required for certain makes and models of router.

For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive more→black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 95

Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core. The v groove cutters rout into the cover and pa more→rt of the core to allow folding of material by hand. Has a 135 degree included angle with 2mm flat at base and is used to create 45 degree fold. Use at 12000-15000 RPM, feed speed 400 - 600mm/min. depending on thickness and machine (CNC machine or hand). Cooling is not required. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 13 • Overall Length Metric: 57 • Angle: 22.5

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 13 • Overall Length Metric: 62 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 13 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

Three flutes for extra fine finish. Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: more→11 • Overall Length Metric: 50 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Lengt more→h Metric: 19 • Overall Length Metric: 71 • Angle: 45

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Dia2 Metric: 12 • Cut Length Metric: 12 • O more→verall Length Metric: 55 • Radius 1 Metric: 5

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia2 Metric: 12 • Cut Length Metric: 12 • O more→verall Length Metric: 50.1 • Radius 1 Metric: 5

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Overall Length Metric: 92

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 57.5 • Radius 1 Metric: 8

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 51 • Radius 1 Metric: 8

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• more→Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Beryllium Copper. • Manufactured from Beryllium Copper. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS044Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.085kgSize: 11mmDimensions: Length: 35mm x Height: 50mmWeight: 0.094KgWarranty: Life

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Cut-away tips allow sockets to be driven with shaft offset of 10°. Deep knurling on shafts allows extra grip whe more→n spinning off fixings. Spring-ball socket retainers. Features & Benefits: • Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. • Cut-away tips allow sockets to be driven when shaft offset is up to 10° from its axis. • Deep knurling on shafts allows extra grip when spinning off fixings. • Spring-ball socket retainers. • Sizes: 50, 125, 250, 375, 500mm. • Supplied in storage tray. • Lifetime guarantee*. • Model No. AK768 Specifications: Model No AK768 Brand: Pr…