Bits & Sockets Sets

Facom NM.A series 1" drive impact extensions. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 200mm

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish more→Specifications • Drive: 1” • Size: 50mm

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 14.5 &bu more→ll; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 8 mm • Dia Metric: 14.5 & more→bull; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 10

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metri more→c: 17 • Overall Length Metric: 65.6 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric more→: 17 • Overall Length Metric: 56.1 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.1 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 14.2 • Radius 1 Imperial: 9/16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Cut Length Metric: 22 • Overall Length Metric: 71 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications: • Shank more→Diameter: 1/2 • Dia Metric: 26 • Dia2 Metric: 12.7 • Cut Length Metric: 35 • Overall Length Metric: 84.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 80

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 5 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 6 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one nylon bearing allowing use with solid surface material. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Im more→perial: 1 5/8 • Cut Length Metric: 20 • Overall Length Metric: 69 • Bearing Dia Metric: 12.7 • Angle: 45

Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more more→easily, by turning component other way up. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 90 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Leng more→th Metric: 48.6 • Radius 1 Metric: 10

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use.• BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and no more→n-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2.• FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling.• DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity.• 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage.• 1/2”SQ DRIVE – 22mm Socket with…