Bits & Sockets Sets

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 10 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 11 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 8 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 4 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 3 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 2 • Saw Teeth: 4

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 3 more→3/20 enables 12mm bore guide bearings to be fitted above slotter for self-guiding work. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.5 • Overall Length Metric: 50 Contents: 1 x Arbor 1 x Spacer 2mm

A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling more→machines at a recommended speed of 3000 RPM (max. 6000 RPM). Material must be well clamped. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 15 • Overall Length Metric: 70

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications: • Shank Diamet more→er: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications: • Shank Diamet more→er: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Two flute straight cutter with 3 degree taper. Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Specifications: • Shank Diameter: more→1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 80 • Angle: 87

This quarter radius can produce a sunk bead or a nosing mould. Requires a side fence for guidance. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 20 • more→Overall Length Metric: 58.5 • Radius 1 Metric: 13

Gives a narrow appearance to a board edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 39 • Radius 1 Metric: 3

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 50.8 • Overall Length Imperial: 2 • Type or Grade: Up-cut

Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. Down-cut pushes woodchips below the work. Two flute. Specifications: • Shank Diameter: more→1/4 • Dia Metric: 4.76 • Dia Imperial: 3/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 2/4 • Overall Length Metric: 63.5 • Overall Length Imperial: 2 1/2 • Type or Grade: Down-cut

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Two flute for fine finish. Specifications: • Shank Diameter: more→1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 65

Trend Professional 1/4in shank straight router cutter - 6.3mm diameter for low melt point plastics 6.3mm diameter X 25mm cutting length cutter for specialist materials with low melting points, includ more→ing UPVC, Styrene and ABS plastics. Made from solid carbide with a single flute profile for fast clean cutting. Ideal for slotting and trimming work in specialised materials for professional finish. Clean efficient cutting, ideal for window extrusions and other specialist industrial material applications. 1/4in shank for use in smaller routers or CNC machines. With 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: …

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &b more→ull; Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 25.5 more→• Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95