Bits & Sockets Sets

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 6mm shank router cutters.

Dustproof clamping collet for Festool OF 1400, OF 2000 & OF 2200 routers. Compatible with 8mm shank router cutters.

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Molybdenum, drop-forged, WallDrive® impact socket.• Hardened and tempered for added strength, with a phosphate finish for greater corrosion resistance.• Ideal for use with air impact wrenches.• Lifetime guarantee*.Chrome Molybdenum, drop-forged, WallDrive® impact socket. Hardened and tempered for added strength, with phosphate finish for greater corrosion resistance. Ideal for use with air impact wrenches.• Chrome Molybdenum, drop-forged, WallDrive® impact socket. • Phosphate finish for greater corrosion resistance. • Ideal for use with air impact wrenches. • Lifetime guarantee*. • Model No. IS165Tec…

• Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.• Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear. • Model No. CV038Technical Specification:Application(s): Mercedes; OM457, OM541, OM542, OM902, OM904, OM906, OM924, OM926, MAN; D25, D28Drive: 1/2"SqNett Weight: 0.41kgDimensions: Length: 95mm x Height: 80mmWeight: 0.84KgWarranty: 1 year

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric: 19 • Overall Length Metric: 70.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 10

Self guided tools for trimming inlay or overlaps. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 28.6

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 15 • Overall Length Metric: 66 • Angle: 45

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 30 • Overall Length Metric: 57.5 • Type or Grade: RH

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS048Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.100kgSize: 15mmDimensions: Length: 35mm x Height: 50mmWeight: 0.104KgWarranty: Life

Set containing 1/4 and 3/8 drive regular and deep 6 point imperial sockets. The set is supplied in a unique Teng Tools TC tray and can be used either on it's own or as part of the Teng Tools TC control system. The tray features a removable hinged click lock lid and dove tail joints which enable different TC trays to be locked together and used as trays in Teng Tools tool boxes and roller cabinets. All of the tools in the set have their own individual place so lost tools can easily be identified. (265x142x50mm, 1.36 kilos).Contents Regular sockets 3/8" drive 6 point 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" Deep sockets 3/8" drive 6 point 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" Deep sockets 1/4" …

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…