Bits & Sockets Sets

Hex SocketFeatures:- Safety lock- Fast release button- Matt Chrome finish- Chrome vanadium steel- For manual useSpecifications:Socket size: 65mmLength: 87mmWeight: 1652g

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications: • Shank Diamet more→er: 1/2 • Dia Metric: 22.5 • Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19 • Angle: 2

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Met more→ric: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

One piece tool to increase glueing area for edge to edge joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 38.1 • Overa more→ll Length Metric: 90

This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2

The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Lengt more→h Metric: 70 • Radius 1 Metric: 12.5

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric more→: 33 • Overall Length Metric: 71.1 • Radius 1 Metric: 20

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25 • Overall Length Metric: 66

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 32 • Overall Length Metric: 73

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 25 • Overall Length Metric: 63

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Requires heavy duty arbor accessory. Recommend more→ed used in a fixed head router at 12,000 rpm. Specifications: • Dia Metric: 86 • Sawbore: 12 • Saw Kerf Metric: 2 • Saw Plate Thick Metric: 1 • Saw Teeth: 12

Ideal for producing nosings and attractive edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.2 • Cut Length Metric: 35 • Overall Length Metric: 83 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 9.5