Bits & Sockets Sets

Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Specifications: &bu more→ll; Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 51 • Bearing Dia Metric: 22 • Radius 1 Metric: 3.5

Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. Specifications: • Shank Diameter: 1/4 • Dia Met more→ric: 22 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 52 • Bearing Dia Metric: 22 • Radius 1 Metric: 4 • Radius 2 Metric: 5.5

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Specific more→ations: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 108

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 15 • Overall Length Metric: 6 more→8 • Radius 1 Metric: 8

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 25.5 more→• Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &b more→ull; Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/2 • Dia Metri more→c: 24 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 75

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• more→Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS047Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.085kgSize: 14mmDimensions: Length: 30mm x Height: 50mmWeight: 0.096KgWarranty: Life

Expert Quality, three double - ended impact sockets size 17, 19 and 21mm. One end is hexagon 6pt and the other a reverse conical gripper thread for the removal of locking wheel nuts. Supplied with a 1 more→/2" sq. dr. 75mm impact extension bar. Packed in a nylon wallet with hook and loop closure in display carton.

• Manufactured from Chrome Vanadium steel.• Contains a selection of vehicle specific sockets and bits for the removal of brake caliper bolts.• Contents: Hex Bits; 7, 8, 9mm, Hex Socket Bits; 7 x 65, 7 more→x 92, 9 x 50, 11 x 100mm, Sockets; 10pt ø11.5mm, 10pt ø15mm, 10pt ø20mm, 7pt ø22mm.Manufactured from Chrome Vanadium steel. Contains a selection of vehicle specific sockets and bits for the removal of brake caliper bolts.• Manufactured from Chrome Vanadium steel. • Contains a selection of vehicle specific sockets and bits for the removal of brake caliper bolts. • Contents: Hex Bits; 7, 8, 9mm, Hex Socket Bits; 7 x 65, 7 x 92, 9 x 50, 11 x 100mm, Sockets; 10pt ø11.5mm, 10pt &#…