Bits & Sockets Sets

For creating a concave radius or cove in the edge of furniture and columns. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 6.4 & more→bull; Overall Length Metric: 61 • Radius 1 Metric: 3.2

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→35 • Dia Imperial: 1 3/8 • Cut Length Metric: 22 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 2 Metric: 6.3

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 &bul more→l; Dia Metric: 23 • Dia2 Metric: 20 • Overall Length Metric: 50 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 2

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 &bull more→; Dia Metric: 22 • Dia2 Metric: 18.9 • Overall Length Metric: 54 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3.2

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 12 • Overall Length Metric: 50 • Radius 1 Metric: 12

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imperial: 1 1/2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66

For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Di more→a Imperial: 1 7/64 • Dia2 Metric: 9.5 • Cut Length Metric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 70 • Radius 1 Metric: 22 • Radius 2 Metric: 18

Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 18 • Overall Length Metric: 46.6 • Radius 1 Metric: 10

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→35 • Cut Length Metric: 16 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Use for producing mortar grooves and for bevelling applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 22.5 • Overall Length Metric: 62.5 &bu more→ll; Angle: 45

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/30 x 1/2 TCT Two Flute Cutter has the following specification D 18mm (45/64in) C 50mm OL 92mm Shank Diameter 1/2in

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11 • Overall Length Metric: 55 &bul more→l; Bearing Dia Metric: 19 • Radius 1 Metric: 9.5

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 58 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia2 Metric: 5.5 • Cut Length Metric: 20 • Overall Length Metric: 62

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.8 • Cut Length Metric: 20 • Overall Length Metric: 62

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Cut Length Metric: 20 • Overall Length Metri more→c: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 26 &b more→ull; Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Has three flutes, and has bevelled corners to prevent scoring, and is for flush trimming of hardwood or plastic edge strip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut more→Length Metric: 12 • Overall Length Metric: 44.5 • Angle: 90

Wera - Tools for bicycles and e-bikes Bicycle Set 8: Bit nuts for the most common TORX® and Hex screws, 7-piecesFeatures:- 7-piece bit nut set with 3/8´´ drive for typical bicycle applications- Bit nu more→ts with 30 mm long and extra slim profile area for better accessibility in tight working spaces - Knurling facilitates hand screwing without slipping off - With Take it easy - tool finder with color coding according to sizes - for easy and fast finding of the required tool - Comes in a sturdy folding bag for easy carry along Specifications:Included in the set:B TORX® Zyklop bit nut with 3/8´´ drive, with extra slim profile range: - TX 25 x 107 mm - TX 30 x 107 mm B Zyklop bit nut with 3/8´´ drive, w…