Bits & Sockets Sets

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 70.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 10

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneere more→d). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 30 • Overall Length Metric: 57.5 • Type or Grade: RH

Self guided tools for trimming inlay or overlaps. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.6 • Dia Imperial: 1 1/8 • Cut Length Metric: 38.1 • Cut Length Imperi more→al: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 28.6

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Lengt more→h Metric: 15 • Overall Length Metric: 66 • Angle: 45

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.5 • Angle: 10

• One of a comprehensive range of Premier Non-Sparking Safety Tools, suitable for daily professional use.• Manufactured from Beryllium Copper.• Die forged.• WallDrive® 12-point socket configuration.• more→Lifetime guarantee*.Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration.• Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • Lifetime guarantee*. • Model No. NS046Technical Specification:Depth: StandardDrive: 1/2"SqMaterial: Beryllium CopperNett Weight: 0.085kgSize: 13mmDimensions: Length: 35mm x Height: 50mmWeight: 0.094KgWarranty: Life

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Drop-forged Chrome Vanadium steel sockets with S2 steel TRX-Star* bits.• Sockets heat treated and chrome pla more→ted for resistance to corrosion.• Fully polished mirror finish with knurled ring to assist gripping with oily fingers.• Contents: TRX-Star* Socket Bits; 1/4"Sq Drive - T8, T10, T15, T20, T25, T27, T30, 3/8"Sq Drive - T40, T45, T47, T50, T55, 1/2"Sq Drive - T60, Security TRX-Star* Socket Bits; 1/4"Sq Drive - T7H, T8H, T9H, T10H, T15H, T20H, T25H, T30H, 3/8"Sq Drive - T40H, T45H, T50H, T55H, TRX-Star* Sockets; 1/4"Sq Drive - E4, E5, E6, E7, E8, 3/8"Sq Drive - E10, E12, E14, E16, 1/2"Sq Drive - E18, E20…

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Square drive as per DIN 3120 - D 25, ISO 1174, with locking pin Hand-operated, knurled grip Chrome-plated With pressed-in pin in GEDORE vanadium special steel, manganese-phosphated * not standardised

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resist more→ant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container.Please note NOT supplied with a tapping drill.Size 14mm x 1.5Length 1 1/2 x Diameter