Bits & Sockets Sets

Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm

Sirius 1/2" Drive Tri-Square Spline Long Socket Bit 140mm Long

With this handy socket, you’ll find that you’ll be able to reduce your fixing time by a significant amount, without compromising on a high-quality result of your fixture. You’ll save considerable time as with our channel socket, you won’t face the common issue that you often do with thin walled sockets. Due to the quality of the product, you won’t find the socket getting stuck in the channel/strut when the bolt or nut is tightened down. This tool is manufactured to the highest standard , and the material used is of a premium Chrome Steel with a Non Rust plated finish to ensure durability and strength. It is available for two different sized unistrut channels. You can get the Sirius Profession…

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Overall …

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Comes in a re-usable clear tube for protection. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 12 • Overall Length Metric: 60 • Type or Grade: Up-cut

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 12 • Overall Length Metric: 60 • Type or Grade: Up-cut

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 14 • Overall Length Metric: 80 • Type or Grade: Up-cut

Can be used with a majority of routers on the market. The bar fits into one of the holes for the router side fence. They have a pivot point which is adjustable in height.

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 92 • Bearing Dia Metric: 12.7 • Angle: 90

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 15 • Cut Length Imperial: 19/32 • Overall Length Metric: 58.5 • Radius 1 Metric: 9.5

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 50

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces and gives sharp corners. The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing. The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 11 • Overall Length Metric: 51 • Bearing Dia Metric: 4.8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.5 • Cut Length Metric: 11 • Overall Length Metric: 51

V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 39 • Overall Length Metric: 69

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 58

The shape of the T-handle allows a transmission of particularly high tightening and loosening torque. The geometry of the handle fills the hand well and the fingers lie safely in the soft rounded handle recesses. This ensures optimal, ergonomic power transmission. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Only allowed for 3/8" VDE bit sockets and sockets of the Wera Zyklop VDE series 8740, 8760, 8767, 8790. The coated handle protects even sensitive surfaces from damage. Features and Benefits: • 3/8" VDE T-handle screwdriver for the transmission of particularly high tightening and loosening torque • Ergonomic 2-component …

High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for square head socket screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out &…

The Wiha FlipSelector TORX® Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. Bits conform to DIN 3126, ISO 1173, Style C6,3. The FlipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 12 x 25mm Standard TORX® Bits: T7, T8, T9, T10, T15, T20, T25, T30 & T40. 1 x Magnetic Bit Holder 58mm.