Bits & Sockets Sets

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66

Use for producing mortar grooves and for bevelling applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 27 • Overall Length Metric: 62.5 • Angle: 60

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length Metric: 32 • Overall Length Metric: 72

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • Sawbore: 12 • Saw Kerf Metric: 4 • Saw Teeth: 4

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 12 • Overall Length Metric: 57.5 • Radius 1 Metric: 6

Gives a narrow appearance to a board edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 39 • Radius 1 Metric: 3

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.Features and Benefits:• T-handle screwdriver for the transmission of particularly high tightening and loosening torque• Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high …

The Step Drill Bit Is Made Of Hss (High-Speed Steel) And Offers A Long Lifetime When Using Coolant. Easily Visible And Durable Markings Of The Hole Diameter Are Provided By Laser-Marked Figures In Both Spiral Flutes. In Addition, The 3-Flat Shank Prevents Slipping In The Chuck And Also Provides Powerful High-Torque Transmission.Features:- Cnc Ground Spiral Flute Enables Optimised Chip Removal And Less Vibration For Even Drilling- Highest Cutting Smoothness Due To Axial And Radial Relief Grinding- Made Of Hss For A Long Lifetime. Laser-Markings For Hole Diameters.- Made Of Hss For A Long Lifetime. Laser-Markings For Hole Diameters. 3-Flat Shank For High-Torque Transmission, No SlippingSpecifications:- …

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Sold loose.

Trend Joinery 3 degree undercut router bit with shank mounted bearing guide. Ideal for routing a leading edge on doors to allow a tight fit against jamb. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.

A basic no-nonsense 12 piece 1/2" drive set of sockets with an FRP ratchet and an extension bar. The set is supplied in a clip box which stores the sockets and includes a clip rail facility for adding extra sockets. Contents: FRP Ratchet & 5" Extension Bar. Sockets: 8, 10, 12, 13, 14, 15, 17, 18, 19 & 24mm

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

With a variety of accessories to perform the most common applications, Stanley drill & screwdriver bit sets offer dependable performance to get the job done. The cases are designed to maintain the diferent accessories and keep them within easy reach. Features & Benefits • Masonry drill bits for drilling into bricks and masonry • HSS TiN drill bits for general purpose drilling in soft steel and non-ferrous metal • Brad point drill bits for clean, accurate holes in wood • Nut drivers for hexagonal fasteners • Large selection of 25mm and 50mm screwdriver bits • Magnetic screwdriver bit holder • Countersink for countersinking screws flush with the material surface …

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 252mm

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63