Bits & Sockets Sets

The 1/4" drive of the AXS Extension Wrench provides the additional reach needed for accessing tight spaces and intricate components. Crafted with meticulous attention to detail, this extension wrench more→is made from high-quality materials, ensuring durability and consistent performance in various work settings. The carefully crafted shape ensures efficient use, enabling you to navigate challenging angles with confidence. Features & Benefits • High Access - Designed to swerve the tightening • High Speed – Strongly designed to be used with a power tool • One side is bigger than the other, which allows the user to drive more strength

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 50mm

The Faithfull 35 piece router bit set with 1/2in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutt more→er shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Specifications Shank Diameter: 12.7mm (1/2in) Set of 35 Tungsten Carbide tips  What's Included (Diameter/Depth) 1 x Straight Cutter (3.2/14mm) 1 x Straight Cutter (6.5/20mm) 1 x Straight Cutter (10/25mm) 1 x Straight Cutter (12.7/20mm) 1 x Straight Cutter (12.7/25mm) 1 x Straight Cutter (19/20mm) 1 x Dovetail Cutter (12.7/8mm) 1 x Dovetail Cutter (15.0/12mm) 1 x Panel Pilot (…

Can be used to make single, double or corner beads. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 19 • Overall Length Metric: 59.3 • Bearing Dia more→Metric: 16 • Radius 1 Metric: 3

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 18 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 18 • Overall Length Metric: 57 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm increment in thickness. Specifications: • Shank Diame more→ter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 03-May • Overall Length Metric: 76 • Bearing Dia Metric: 28 • Rebate Metric: 11

This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 &bu more→ll; Cut Length Metric: 16 • Overall Length Metric: 60 • Bearing Dia Metric: 16 • Radius 1 Metric: 10

Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metri more→c: 38 • Overall Length Metric: 86.5 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5 • Radius 2 Metric: 12.5

Classic skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 37 • Cut Length Metric: 40 • Overall Length Metric: 88.5 • Bearing Dia Metric: 16 • Ra more→dius 1 Metric: 13.5

A quarter ellipse cutter for architraves and mould finishes. For stationary machines - 12000 RPM recommended speed. Specifications: • Shank Diameter: 1/2 • Dia Metric: 69.2 • Cut Leng more→th Metric: 16 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 44

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 67 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 17.5

Trend Kitchen Fitters Pack - 3 X 50mm x 12.7mm worktop cutters 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. C more→ut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. Supplied in plastic storage case for protection when not in use. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • …

The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications: &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric: 45 • Overall Length Metric: 94 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3 • Radius 2 Metric: 9

Ideal for shelves. Edge moulding applications only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 3

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 10 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 15 • Saw Teeth: 2

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 30 • more→Dia2 Metric: 10.5 • Cut Length Metric: 7 • Overall Length Metric: 60 • Radius 1 Metric: 3

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • more→Dia2 Metric: 12.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 65

covers 10 sizes, 8-24mm
45 tooth ratchet handle
supplied in a plastic container.
Great Quality material