Bits & Sockets Sets

Encaja perfectamente en el Systainer³ con compartimento en la tapa
Las puntas se mantienen seguras en módulos que pueden moverse con flexibilidad
Punta de destornillador con niquelado químico para una mayor durabilidad
Recubrimiento de cromo para una mayor protección anticorrosiva

Drilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the EXPERT SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn't jam and presents no weakness on impact.For construction professionals drilling concrete and reinforced concrete regularly, for example for fixings and installations, the Bosch EXPERT SDS plus-7X Hammer Drill Bit offers peerless performance, reliability and longevity. It is THE EXPERT accessory for SDS plus rotary hammer drills. Lasts up to 3x longer than Bosch SDS plus-3 Drill Bit.…

Socket Set / 12 Number of Items

High performance solid carbide K 20 twist drill, especially well suited for high strength steels at high cutting speeds.Specifications: - Ø: 10,5 mm- Total length L1: 133,0 mm- Flute length L2: 87,0 mm- Material: Tungsten carbide- Surface: Tialn- Cutting direction: right hand cutting- Shank: cylindrical- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle : 118°- Helix angle: 20-30°- Weight: 0,05900 Kg

Hex SocketFeatures:- Safety lock- Fast release button- Matt Chrome finish- Chrome vanadium steel- For manual useSpecifications:Socket size: 65mmLength: 87mmWeight: 1652g

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22.5 • Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19 • Angle: 2

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

One piece tool to increase glueing area for edge to edge joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 38.1 • Overall Length Metric: 90

This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications: • Shank Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2

The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Length Metric: 70 • Radius 1 Metric: 12.5

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 33 • Overall Length Metric: 71.1 • Radius 1 Metric: 20