Bits & Sockets Sets

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metric: 15 • Cut Length Imperial: 19/32 • Overall Length Metric: 58.5 • Radius 1 Metric: 9.5

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 50

Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Overall …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.5 • Cut Length Metric: 11 • Overall Length Metric: 51

Trend 3/20X1/4TC TCT Two Flute Router Cutter 6.3mm x 16mm The Trend 3/20X1/4TC TCT router cutters are perfect for use on abrasive materials such as chipboard, MDF & plywood. The two flutes give a clean finish to cut edges and the tungsten carbide tips ensure long life and maximum durability. Features:
- Designed for the most abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics
- Two flutes give a clean finish to cut edges
- For routing and profiling natural timbers and man-made boards
- Suitable for most makes of router Specification:
- D: 1/4 inch
- D: 6.3 mm
- C: 16 mm
- OL: 47 mm
- Shank Diameter: 1/4 inch…

V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 39 • Overall Length Metric: 69

For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Comes in a re-usable clear tube for protection. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 58

The shape of the T-handle allows a transmission of particularly high tightening and loosening torque. The geometry of the handle fills the hand well and the fingers lie safely in the soft rounded handle recesses. This ensures optimal, ergonomic power transmission. Individually tested tool as per IEC 60900 at 10,000 V for safe working at the approved voltage of 1,000 V. Only allowed for 3/8" VDE bit sockets and sockets of the Wera Zyklop VDE series 8740, 8760, 8767, 8790. The coated handle protects even sensitive surfaces from damage. Features and Benefits: • 3/8" VDE T-handle screwdriver for the transmission of particularly high tightening and loosening torque • Ergonomic 2-component …

High quality bits for square socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • Suitable for square head socket screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out &…

The Wiha BitBuddy® TY Bit Set 8 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered profile size on the bit base ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to …

The Wiha FlipSelector Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. Bits conform to DIN 3126, ISO 1173, Style C6,3. The FlipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 1 x 25mm Standard Slotted Bit 5.5mm. 1 x 25mm Standard Phillips Bit PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 4 x 25mm Standard TORX® Bits: T15, T20, T25 & T30. 3 x 25mm Standard Hexagon Bits: 3.0, 4.0 & 5.0mm. 1 x Magnetic Bit Holder 58mm.…

The Bahco 59/S36BCR Ratcheting Coloured Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. TORX bits are colour coded to easily identify the size of the tip. Supplied in a durable carry case. Contains:5 x 25mm Phillips Bits: PH0, PH1, PH2, PH3 and PH2G.4 x 25mm Pozidriv Bits: PZ0, PZ1, PZ2 and PZ3.7 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30 and TX40.3 x 25mm Slotted Bits: 4.5, 5.5 and 6.5mm.8 x 25mm Hexagon Bits: 1.5, 2, 2.5, 3, 4, 5, 6 and 8mm.6 x Magnetic Nut Drivers: 6, 7, 8, 10, 11 and 13mm.1 x 1/4in Socket Adaptor.1 x KM653 Magnetic Universal Bit Holder.1 x Ratcheting Screwdriver Handle.Additional Information:• …