Bits & Sockets Sets

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 64

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 11 • Dia Imperial: 7/16 • Cut Length Metric: 25 • Overall Length Metric: 57

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 20 • Overall Length Metric: 52

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→6 • Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 69

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 61

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→8 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 57

Threaded inserts for fixings in woods, man-made boards and fibre board e.g MDF. Threaded inserts have enlarged flange ends to prevent them from 'pulling out' after continual usage. The inserts nee more→d to be located from the underneath. Specifications: • Pack Qty: 50 pack Contents: 50 x Threaded insert

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. more→Suitable for Trend Hinge & Lock Jigs. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Comprehensive set of impact adaptors for use on all types of impact tools.• Manufactured from drop-forged Ch more→rome Vanadium steel with phosphate finish for added corrosion resistance.• Sizes: 1/4"(F) x 3/8"(M), 3/8"(F) x 1/4"(M), 3/8"(F) x 1/2"(M), 1/2"(F) x 3/8"(M), 1/2"(F) x 3/4"(M), 3/4"(F) x 1/2"(M), 3/4"(F) x 1"(M), 1"(F) x 3/4"(M).• Lifetime guarantee*.Comprehensive set of impact adaptors for use on all types of impact tools. Manufactured from drop-forged Chrome Vanadium steel with phosphate finish for added corrosion resistance.• Comprehensive set of impact adaptors for use on all types of impact to…

• High-speed HSS 4341 double spiral flute step drill.• Double spiral flutes for efficient swarf clearance.• Allows clog-free precision drilling of ten different size holes between 4-30mm with just one more→bit.• Hole Sizes: 4-30mm in 2mm increments.• Supplied in plastic storage case.High-speed HSS 4341 double spiral flute step drill. Double spiral flutes for efficient swarf clearance. Allows clog-free precision drilling. Supplied in plastic storage case.• High-speed HSS 4341 double spiral flute step drill. • Double spiral flutes for efficient swarf clearance. • Allows clog-free precision drilling. • Hole Sizes: 4-30mm in 2mm increments. • Supplied in plastic storage case. • Model No. AK4748Techni…

• Fully ground HSS Cobalt drill bit manufactured to DIN 338.• 5% Cobalt helps to increase life of drill bit.• 135° Split point is self-centring for easier penetration.• Efficient clog-free swarf more→clearance.• Suitable for drilling high carbon steel and stainless steel.• High-density case for safe storage.Fully ground HSS Cobalt drill bit manufactured to DIN 338. 5% Cobalt gives increased heat hardness which helps extend the life of the drill bit. 135° Split point is self-centring which helps to reduce thrust and aids an easier penetration. Efficient clog-free swarf clearance. Suitable for drilling high carbon and stainless steel. High-density case for safe storage.• Fully ground HSS Cob…

• Superior quality SDS Plus drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS Plus drill bits suitable for a variety of applications. Drills more→are fully hardened and ground.Technical Specification:Size: ø25 x 1000mmWeight: 0.57KgWarranty: Consumable

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection with locking pin for secure socket holding. Sold loose.

Heavy duty steel body core drill with TCT cutting tips. Ideal for cutting clean holes in masonry. Use with 1/2" BSP compatible arbors and drills equipped with a safety clutch. Do not use with drills s more→et in hammer action.