Bits & Sockets Sets

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 32mm

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 35mm

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 36mm

Facom NMB series 1" drive long reach 6-Point thin wall sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Features & Benefits • Thin wall for better access • 6-Point convex pattern for increased resilience Specifications • Drive: 1” • Size: 24mm

Facom NMB series 1" drive long reach 6-Point thin wall sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Features & Benefits • Thin wall for better access • 6-Point convex pattern for increased resilience Specifications • Drive: 1” • Size: 27mm

Facom NMB series 1" drive long reach 6-Point thin wall sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Features & Benefits • Thin wall for better access • 6-Point convex pattern for increased resilience Specifications • Drive: 1” • Size: 30mm

Facom NMB series 1" drive long reach 6-Point thin wall sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Features & Benefits • Thin wall for better access • 6-Point convex pattern for increased resilience Specifications • Drive: 1” • Size: 32mm

Facom NMB series 1" drive long reach 6-Point thin wall sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Features & Benefits • Thin wall for better access • 6-Point convex pattern for increased resilience Specifications • Drive: 1” • Size: 33mm

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. Ideal for use by wood turners with smaller routers to create staves on 25mm stock. For full bevels, template should be fitted to component. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Dia2 Metric: 4.82 • Cut Length Metric: 28 • Overall Length Metric: 68 • Angle: 67.5

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Cut Length Metric: 16 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 53 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16

Ovolo and rounding over cutters without bearing guides are chosen for panel work and edge moulding. Bearing guided cutters are ideal for curved work. All can be used on natural timbers, man-made particle and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table-tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Self Guided cutters for rounding over edges, without the need for a side fence. If cutter is lowered a top quirk can be produced. Bull nose moulding can also be produced by taking a second pass from the opposite side of the workpiece. (D= Cutting Diameter, C= Length of Cut, R= Radius)

For creating a concave radius or cove in the edge of furniture and columns. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 6.4 • Overall Length Metric: 61 • Radius 1 Metric: 3.2

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 22 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 2 Metric: 6.3

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 23 • Dia2 Metric: 20 • Overall Length Metric: 50 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 2

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Dia2 Metric: 18.9 • Overall Length Metric: 54 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3.2

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 12 • Overall Length Metric: 50 • Radius 1 Metric: 12

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imperial: 1 1/2 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66

For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Dia2 Metric: 9.5 • Cut Length Metric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 70 • Radius 1 Metric: 22 • Radius 2 Metric: 18

Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 18 • Overall Length Metric: 46.6 • Radius 1 Metric: 10

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Cut Length Metric: 16 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Use for producing mortar grooves and for bevelling applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 22.5 • Overall Length Metric: 62.5 • Angle: 45

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/30 x 1/2 TCT Two Flute Cutter has the following specification D 18mm (45/64in) C 50mm OL 92mm Shank Diameter 1/2in