Bits & Sockets Sets

For window boards 25mm thick. Two passes create shallow nosing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 30 • Cut Length Metric: 16 • Overall Length Metric: 62.8 &bul more→l; Bearing Dia Metric: 12.7 • Radius 1 Metric: 16

Trend Craft Pro 1/2in shank Intumescent strip cutter - 20mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent more→strip. Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. 1/2in shank, for heavy duty work with bigger routers. Position of groove can be altered with the router plunge for correct setting for 45 minutes fire and smoke protection. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.…

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Heavy duty padded bag for easy transportation of the KWJ900P worktop jig PU coating Hand strap Hook & loop flap closure Tool not included

Four fluted up-cut spiral router cutter for acrylic plastic (cast or extruded). Can be used to trim, rebate and surface. Can be used to ramp plunge cut. Will rout low melting point plastics with more→shallow passes (not plunge cutting or surfacing). Use in a router table. Recommended speed 18,000 rpm. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 45 • Overall Length Metric: 96 • Type or Grade: Up-cut

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specificat more→ions: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications: • Shank Diameter: 1/4 • Dia Metric: 14.5 • Cut Length Metric: 19.5 • Overall more→Length Metric: 53.5 • Radius 1 Metric: 7.5

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 12.6 • Ov more→erall Length Metric: 49.7 • Bearing Dia Metric: 9 • Radius 1 Metric: 6.3

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 26 • Cut Length Metric: 14.3 • Ov more→erall Length Metric: 51.4 • Bearing Dia Metric: 9 • Radius 1 Metric: 8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 37 • Overall Length Metric: 79

Extra long two flute cutter for routing hollow honey-comb work top boards only. Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutte more→r retraction into the router base. TC tips are conventionally ground. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. For hollow honey-comb boards only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Cut Length Metric: 70 • Overall Length Metric: 115 • Type or Grade: Centre tip

Set of 15 1/2" drive regular 12 point AF sockets supplied on a clip rail with socket clips. Made from chrome vanadium steel with a satin finish. Contents: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 3/16, more→7/8, 1 5/16, 1 1/16, 1 1/8, 1 3/16 & 1 1/14"

17 piece set of regular 6-point sockets
½ inch drive
Made from chrome vanadium steel
Satin finish
Supplied in storage tray

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.