Bits & Sockets Sets

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Overall Length Metric: 90 • Bearing Dia Metric: 12.7

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 82 • Bearing Dia Metric: 9.5

Versatile cutter, using all or part of the cutter. Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 24 • Overall Length Metric: 72 • Bearing Dia Metric: 9.5 • Beari more→ng Dia Imperial: 3/8 • Radius 1 Metric: 6.3

A self guiding flat ovolo to give a smooth corner finish. Alternatively, can be used to produce glazing bar profiles. Specifications: • Shank Diameter: 1/4 • Dia Metric: 30 • Cut Leng more→th Metric: 11 • Cut Length Imperial: 7/16 • Overall Length Metric: 60.5 • Bearing Dia Metric: 9.5 • Rebate Metric: 10 • Radius 1 Metric: 12

For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Dia Imperial: 1 1/4 • Cut Length Metric: 22 • Overall L more→ength Metric: 61 • Angle: 45

To create profiles on face or edge of drawer fronts and cabinet doors. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 14 • more→Cut Length Imperial: 35/64 • Overall Length Metric: 54 • Radius 1 Metric: 4.5 • Radius 2 Metric: 4.5

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 31.7 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 2 • Overall Length Metric: 54.5 • Bearing Dia Metric: 20

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 2.5 • Overall Length Metric: 55 • Bearing Dia Metric: 20

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. For use with smaller routers where application more→allows. Neatly cuts grooves on doors or frames to accept a weatherseal. Groove can be positioned in bottom of a rebate. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 2.8 • Overall Length Metric: 55.3 • Bearing Dia Metric: 20

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specificat more→ions: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 53 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metr more→ic: 7.5 • Overall Length Metric: 48 • Radius 1 Metric: 4.8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 67

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: more→3/4 • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Overall Length Metric: 53 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Rebate Metric: 3

The Wiha Standard Pozidriv Bits have precision milled profile tips for a perfect fit, and also high-contrast laser marking's on the bit for easy identification of the profile size.Conforms to DIN 3126 more→, ISO 1173, Style C6,3 DIN ISO 8764-1. Specifications: Size: PZ2 x 25mm.Pack Size: 100.

• Superior quality SDS MAX drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS MAX drill bit suitable for a variety of applications. Drills are more→fully hardened and ground.Technical Specification:Size: ø32 x 920mmDimensions: Length: 32mm x Height: 1005mmWeight: 2.078KgWarranty: Consumable

• Superior quality SDS MAX drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS MAX drill bit suitable for a variety of applications. Drills are more→fully hardened and ground.Technical Specification:Size: ø38 x 570mmDimensions: Length: 30mm x Height: 650mmWeight: 2.42KgWarranty: Consumable