Bits & Sockets Sets

For 4.0mm thick strip. For 15.0mm wide intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 15 • Overall Length Metric: 68 • Bearing more→Dia Metric: 32 • Rebate Metric: 4

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute hel more→ical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 40 • Overall Length Metric: 100 • Type or Grade: Up-cut

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications: • Shank Diameter: 1/ more→4 • Dia Metric: 27 • Cut Length Metric: 9 • Overall Length Metric: 51.5 • Angle: 45

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imper more→ial: 1 • Cut Length Metric: 11.1 • Overall Length Metric: 64 • Bearing Dia Metric: 25.4 • Bearing Dia Imperial: 1

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Overall Length Metric: 79 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximat more→e 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38.1 • Overall Length Metric: 106 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2

For window boards 25mm thick. Two passes create shallow nosing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 30 • Cut Length Metric: 16 • Overall Length Metric: 62.8 &bul more→l; Bearing Dia Metric: 12.7 • Radius 1 Metric: 16

Trend Craft Pro 1/2in shank Intumescent strip cutter - 20mm width Two Flute Carbide tips. Cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent more→strip. Bearing guide ensures the correct 4mm depth and 15mm width is always achieved to meet Fire Regulations. 1/2in shank, for heavy duty work with bigger routers. Position of groove can be altered with the router plunge for correct setting for 45 minutes fire and smoke protection. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.…

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Heavy duty padded bag for easy transportation of the KWJ900P worktop jig PU coating Hand strap Hook & loop flap closure Tool not included

Four fluted up-cut spiral router cutter for acrylic plastic (cast or extruded). Can be used to trim, rebate and surface. Can be used to ramp plunge cut. Will rout low melting point plastics with more→shallow passes (not plunge cutting or surfacing). Use in a router table. Recommended speed 18,000 rpm. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 45 • Overall Length Metric: 96 • Type or Grade: Up-cut

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers. Specificat more→ions: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications: • Shank Diameter: 1/4 • Dia Metric: 14.5 • Cut Length Metric: 19.5 • Overall more→Length Metric: 53.5 • Radius 1 Metric: 7.5

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 12.6 • Ov more→erall Length Metric: 49.7 • Bearing Dia Metric: 9 • Radius 1 Metric: 6.3

Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters. Specifications: • Shank Diameter: 1/4 • Dia Metric: 26 • Cut Length Metric: 14.3 • Ov more→erall Length Metric: 51.4 • Bearing Dia Metric: 9 • Radius 1 Metric: 8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 37 • Overall Length Metric: 79

Extra long two flute cutter for routing hollow honey-comb work top boards only. Use only in professional routers with an 80mm deep plunge and suitable one piece multi-slit collet to ensure safe cutte more→r retraction into the router base. TC tips are conventionally ground. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. For hollow honey-comb boards only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Cut Length Metric: 70 • Overall Length Metric: 115 • Type or Grade: Centre tip

23 piece Hex socket set
Made from chrome vanadium steel
Provide excellent torque
Minimise risk of rounding fasteners
Supplied in plastic carrying case