Bits & Sockets Sets

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. With locking pin for secure socket holding. Sold loose.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Original Makita quality
Durable and robust
Strap file 9 mm

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wan more→dering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Expansion Inserts No. 4 for Bearing Puller | Internal Thread M10 | Maximum Tensile Force 40 kN, RFID chip, set, 2 pieces.
Product strengths: tool with an RFID chip so that it can be found in th more→e workshop. The Facom integrated chip guarantees you easy to find and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires adequate organisational equipment. Use with the reversible ratchets and drive squares 3/8 inch and 1/2 inch
Technical data: |d [mm]: 9.0|No. : 4|with internal thread: M10|T [kN]: 40|[g]: 39|[kg]: 0.040

Features:- 6mm diameter Phillips 2 bit designed for smooth operation in autofeed screwdriver- Minimizes screw jamming by precise application. Also a very useful long length bit for use with impact dri more→versSpecifications:Diameter (D) - 6 mmOverall Length - 127 mmScrew Head - PH2 Model - BFR440 Application:Drywalling, plasterboard, screwdriving, decking, drylining

Part of the Stanley Tools Transmodule System, a modular mechanics storage system ideal for the workshop. Designed to use with compatible Transmodule system storage cabinets. All the sockets feature Ma more→xi Drive, that helps reduce fastener rounding and are made from Chrome Vanadium Steel. The bit sockets are made from S2 steel, HRC 60 ±2 with a 20% higher torque than CrV. The extensions are also made from Chrome-Vanadium steel with a full polished finish. The ratchet features a socket safety lock and a reverse lever with rotation direction displayed. Made from Chrome-Vanadium steel and fitted with a chemical resistant, ergonomic bi-material handle and quick release button. Contains the following: …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 30 • Dia Imperial: 1 3/16 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softw more→ood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Includes 3 extra bearings. Tool creates rebates 7.9mm, 9.5mm, 11.1mm & 12.7mm. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 62.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 11

Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softw more→ood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Includes 3 extra bearings. Tool creates rebates 7.9mm, 9.5mm, 11.1mm & 12.7mm. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 12.7 • Rebate Metric: 11

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imper more→ial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 57 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imper more→ial: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 63.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4