Bits & Sockets Sets

Facom NM.A series 1" drive impact extensions. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 200mm

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish more→Specifications • Drive: 1” • Size: 50mm

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 14.5 &bu more→ll; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

Cuts cleanly without feather edging. Solid Carbide for long life. Cuts to a fine ' V' groove point. Ideal for sign writing. Specifications: • Shank Diameter: 8 mm • Dia Metric: 14.5 & more→bull; Cut Length Metric: 12.5 • Overall Length Metric: 57 • Angle: 60

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Cut Length Metric more→: 19 • Overall Length Metric: 61 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 10

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metri more→c: 17 • Overall Length Metric: 65.6 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric more→: 17 • Overall Length Metric: 56.1 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 17

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.1 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 14.2 • Radius 1 Imperial: 9/16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Cut Length Metric: 22 • Overall Length Metric: 71 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 25 • Overall Length Metric: 75 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 19.1 • Radius 1 Imperial: 3/4

Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications: • Shank more→Diameter: 1/2 • Dia Metric: 26 • Dia2 Metric: 12.7 • Cut Length Metric: 35 • Overall Length Metric: 84.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 80

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 5 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.1 • Cut Length Metric: 12 • Overall Length Metric: 6 more→7 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Ideal for newel posts and caps for stairs. Supplied with one nylon bearing allowing use with solid surface material. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Im more→perial: 1 5/8 • Cut Length Metric: 20 • Overall Length Metric: 69 • Bearing Dia Metric: 12.7 • Angle: 45

Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more more→easily, by turning component other way up. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 90 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→48 • Cut Length Metric: 22 • Overall Length Metric: 68 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 15.9 • Radius 1 Imperial: 5/8

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Leng more→th Metric: 48.6 • Radius 1 Metric: 10

The BOSCH PROFESSIONAL Expert SDS Max-8x 22x800x920 mm Wall Hammer Drill Bit is a high-quality and durable drill bit designed for professionals. It is specifically crafted for use with electric tools more→and accessories. The drill bit features an SDS Max-8x design, which ensures maximum power transfer and stability while drilling through walls. This makes it an ideal choice for heavy-duty applications, such as drilling into concrete or masonry.With a diameter of 22mm and a length of 800mm, this drill bit offers versatility and precision. It is capable of drilling deep holes with ease, allowing for a wider range of applications. The length of 920mm makes it especially suitable for drilling through …

Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration. Features & Benefits: • Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • more→Lifetime guarantee*. • Model No. NS056 Specifications: Model No NS056 Brand: Premier Depth: Standard Drive: 1/2"Sq Material: Beryllium Copper Nett Weight: 0.145kg Size: 23mm

The Diamond Drill Bit Easy Dry makes dry drilling in ceramic easy. Its integrated coolant storage allows for smooth performance, while the bit´s robust and wear-resistant vacuum-brazed diamonds make w more→ork easier. Additionally, a working length of 33 mm allows the bit to comfortably drill holes in tiles of all thicknesses. This product is intended for a variety of materials from soft wall tiles to very hard floor tiles and fine stoneware. This robust and compact set features a transparent storage box providing a good overview of its contents as well as safe storage and transport. Do not drill in impact mode. It is suitable for use in cordless screwdrivers and drills with a 13 mm-chuck. 3-piece d…

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…