Bits & Sockets Sets

To rout butterfly key and splines in timbers and man-made boards. Use in conjunction with 104 deg (14 deg) dovetail cutter ref. L120 which cuts dovetail pocket. Use in a router table. Cut material in two passes to create a butterfly shape, width of butterfly spline is determined by dovetail cutter used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 46 • Overall Length Metric: 84 • Angle: 104

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only.. Specifications: • Shank Diameter: 1/2 • Dia Metric: 86 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 40

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.5 • Cut Length Metric: 20 • Overall Length Metric: 59 • Radius 1 Metric: 17

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush fitted to the router base should be used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Overall Length Metric: 71.5

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Dia Imperial: 1 37/64 • Cut Length Metric: 25 • Overall Length Metric: 66

Ideal for producing nosings and attractive edge moulds. Beads Ref. 9/11 has a matching cutter Ref. 8/11 for jointing & hinging. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24 • Cut Length Metric: 10 • Overall Length Metric: 60 • Radius 1 Metric: 5

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 2 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 4 • Saw Teeth: 4

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 10 • Overall Length Metric: 60 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 10mm strip

34 piece 3/8" drive socket set containing 6 point sockets, a 72 teeth flex head ratchet, 3" and 6" extension bars, 1/2"F:3/8"M T bar adaptor, a universal joint and 20 bits. The set comes supplied in a plastic case with a snap lock and hinges with metal pins for extended life. (240x125x38mm, 1.12 kilos).Contents: Bits 1/4" hex 3mm hex, 4mm hex, 5mm hex, 6mm hex, TX10, TX15, TX20, TX25, TX27, TX30, TX40, 3mm flat, 4mm flat, 5.5mm flat, PH1, PH2, PH3, PZ1, PZ2, PZ3. Regular sockets 3/8" drive 6 point 8, 10, 11, 12, 13, 14, 15, 17, 19mm Accessories 3/8" drive 72 teeth flexible ratchet, 1/4"F:3/8"M T bar adaptor, universal joint, 3" and 6" extension bars

1/2" square drive digital torque adaptor supplied with calibration certificate The Sealey STW290 is designed for use with a standard ratchet or breaker bar, ideal for tightening wheel nuts to factory specifications. This model has a 1/2" square drive and a range of 40-200Nm. The large LCD display with LED/audible alarm indicates achieved and target torque levels. Features:  
- Designed for use with a standard ratchet or breaker bar 
- Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications 
- Large LCD display with LED/audible alarm indicating achieved and target torque levels 
- Selectable readings in Nm, lb.ft, lb.in, kg.cm or kg.m and accur…