Bits & Sockets Sets

Expansion inserts no. 10 for bearing puller, internal thread M16, tensile force max. 490 kN RFID chip set, 2-piece set.
Product thicknesses: tool with an RFID chip so that it can be found in th more→e workshop. The chip integrated by Facom guarantees you easy finding and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires appropriate organisation equipment. Use with the reversible ratchets and drive square edges 3/8 inch and 1/2 inch
Technical data: |d [mm]: 25.0 | No. 10 | with internal thread: M16|T [kN]: 490 | [g]: 487 | [kg]: 0.490

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38.1 • Dia Imper more→ial: 1 1/2 • Cut Length Metric: 16 • Overall Length Metric: 69 • Bearing Dia Metric: 38.1 • Bearing Dia Imperial: 1 1/2

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/25 inconjunction with Ref. 90/20. S more→pecifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 19 • Overall Length Metric: 65 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 12.7

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay. This trimmer has twin bearings for stability by increasing the bearing surface. more→An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T. 1/2in Shank A Angle = 90 . C = 38.1mm. D = 12.7mm.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 30 • Dia Imperial: 1 3/16 • Cut Length Metric: 25 • Overall Length Metric: 67

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Head swings through 90° in both directions. With locking pin for secur more→e socket holding. Sold loose.

• General-purpose HSS roll forged drill bits manufactured to DIN 338.• 118° Point tip.• Efficient clog-free swarf clearance.• Suitable for use with both hand and pillar drills.• Sizes: ø1 to more→8mm in 0.5 increments (10 of each).• Sizes: ø8.5 to 10mm in 0.5 increments (5 of each).• Supplied in tough composite storage case.General-purpose HSS roll forged drill bits manufactured to DIN 338. 118° Point tip. Efficient clog-free swarf clearance. Suitable for use with both hand and pillar drills. Supplied in tough composite storage case.• General purpose HSS roll forged drill bits manufactured to DIN 338. • 118° Point tip. • Efficient clog-free swarf clearance. • Sizes: ø1 to…

Features & Benefits:• Tool-free conversion -- Quick clamp system allows removal of motor from base to base• Plunge Lock release level - conveniently located to allow maximum control, springs more→to locked position for ease of use• Fine adjustment on depth rod for accurate depth• Smooth plunge action• 7 step adjustable depth stop turret, plus microfine adjustment on depth rod• Transparent subbase for enhanced visibilitySpecifications:Plunge Depth: 55mmSub-Base Opening: 54mmMaximum bit diameter: 44mmFor use with GFK 600 router

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 38mm

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 41mm

Fifteen piece cutter set, containing a range of popular cutters. Suitable for grooving, profiling and moulding. Use on softwoods, hardwoods, MDF and plywood. Supplied in a plastic carry case. Sp more→ecifications: • Shank Diameter: 1/2 • Pack Qty: 15 piece Contents: 1 x Single Flute dia 4.8mm x 11mm 1 x Two Flute dia 6.3mm x 19mm 1 x Two Flute dia 12.7mm x 25mm cut 1 x Two Flute dia 19mm x 25mm cut 1 x Dovetail dia 12.7mm 2 x Guided Round Over radius 9.5mm & 12.7mm 1 x Guided Chamfer 45 degree 1 x Guided Roman Ogee radius 4mm 1 x Guided Trimmer dia 12.7mm 2 x Guided Cove radius 6.3mm & 12.7mm 1 x 'V' Groove 45 degree 1 x Core Box radius 6.35mm 1 x Guided Rebater 11.1 rebate