Bits & Sockets Sets

Assortment of 18 bits for RIBE screws, with 10 mm hexagon drive and 2 accessories, in soft foam tray and metal case. Contents: 867RIBE - bits for RIBE screws: 5-6-7-8-9-10-11-12-13 mm 867RIBE/L - more→bits for RIBE screws: 5-6-7-8-9-10-11-12-13 mm 867/1 & 867/2 bit holder sockets

Part of the Laser range of tools for Motorcycle, Cars, HGV workshopsSize range: 8mm - 10mm studsThis kit can be used on cylinder heads, gearboxes, final drives, hubs etcSuitable for use on motorcycle more→engines, cars and trucks.Sized to allow on vehicle use where access permits reducing disassembly timeHelps prevent drill wander which can cause extra damage to expensive components. All drill bit are considered as consumables

Reisser ZENTRO 4-Cutter SDS-max hammer drill for reinforced concrete and hard aggregates For electric hammers utilising the SDS-max tool holder system. SDS-max 4-Cutter Hammer Drill Bit40.0mm Diameter more→Overall length: 370mmPTDREI139688

Teng Tools sockets are manufactured from strong chrome vanadium steel in accordance with ISO9000 and AS954. They provide excellent torque whilst reducing the risk of rounding fasteners. This TENT122 more→1 1/2inch drive 12-point socket set comprises 21 pieces which are supplied in a plastic case with a latch lock retractable handle and metal pin hinges. The underside of the case is fitted with rubber feet to prevent it from sliding. This 21-piece set contains the following: 16 x 1/2in Bi-Hex Sockets 10 11 12 13 14 15 16 17 18 19 21 22 24 27 30 & 32mm.1 x 1/2in Reversible Ratchet.2 x 1/2in Extension Bars: 63 & 150mm.1 x 1/2in Universal Joint.1 x 1/2in T-Bar Adaptor (1/2in Female

Set of 6 hand sockets for Torx head screws, long series (item 910FTX/L), on support. Sizes: E4 | E5 | E6 | E7 | E8 | E10

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm shank tools are for use with medium and heavy duty routers only. D 86 mm C 1/2 inch C 12.7 mm B 12.7 mm A 15 degrees

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm shank tools are for use with medium and heavy duty routers only. D 86 mm C 12.7 mm B 12.7 mm R 40 mm

Trend weather seal designed to accomodate the popular Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between the sash and frame. D 41.3 mm D2 more→28.3 mm C 4.8 mm C2 2.7 mm OL 67 mm B 22 mm

Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. D 46.3 mm D2 34.3 mm C 10.3 mm C2 2.7 mm OL 90 mm B 28.6 mm

The two bearings supplied offer the means of cutting different depths of mouldings. D 63.5 mm C 1 inch C 25.4 mm B 12.7 mm B2 16 mm R 1 inch R 25.4 mm

Self-guiding cutters for rounding over edges do not require a side fence. D 57.1 mm C 1 inch C 25.4 mm B 9.5 mm B 12.7 mm R 22.2 mm Shank Diameter 1/2 inch

The Facom 6-Point Stubby Impact Sockets are made from Chrome Molybdenum steel tempered via a heat treatment for increased durability. Coated with manganese phosphate for higher protection and corrosi more→on resistance. Its cross hole design prevents unintentional separation of adapter and socket. The stubby design gives greater accessibility in tight or hard to reach applications due to 25% shorter length. The 23 Piece Set supplied in a compact durable case. Contains the following: 7 x Stubby Impact Sockets: 13 14 15 16 17 18 & 19mm. 8 x Hex Impact Bits: 5 6 8 10 12 14 17 & 19mm. 7 x TORX Impact Bits: T25 T27 T30 T40 T50 T55 & T60. 1 x Socket Adaptor.PTDFCMNSSJ23PB