only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Bits & Sockets Sets

 prices on 18994 models  
£200
clear
Save List
Show
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm shank tools are for use with medium and heavy duty routers only. D 86 mm C 12.7 mm B 12.7 mm R 40 mm
£131.26
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Trend weather seal designed to accomodate the popular Schlegel Aquamac 63 or Exitex Aquatex P6 weather strip system and allows for a particularly small gap between the sash and frame. D 41.3 mm D2 28.3 mm C 4.8 mm C2 2.7 mm OL 67 mm B 22 mm
£131.26
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Recessing cutter will accommodate the Schlegel Aquamac 21 or Exitex Aquatex A10 seal. D 46.3 mm D2 34.3 mm C 10.3 mm C2 2.7 mm OL 90 mm B 28.6 mm
£131.26
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
The two bearings supplied offer the means of cutting different depths of mouldings. D 63.5 mm C 1 inch C 25.4 mm B 12.7 mm B2 16 mm R 1 inch R 25.4 mm
£131.26
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Self-guiding cutters for rounding over edges do not require a side fence. D 57.1 mm C 1 inch C 25.4 mm B 9.5 mm B 12.7 mm R 22.2 mm Shank Diameter 1/2 inch
£131.26
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
You may be interested in
The Facom 6-Point Stubby Impact Sockets are made from Chrome Molybdenum steel tempered via a heat treatment for increased durability. Coated with manganese phosphate for higher protection and corrosion resistance. Its cross hole design prevents unintentional separation of adapter and socket. The stubby design gives greater accessibility in tight or hard to reach applications due to 25% shorter length. The 23 Piece Set supplied in a compact durable case. Contains the following: 7 x Stubby Impact Sockets: 13 14 15 16 17 18 & 19mm. 8 x Hex Impact Bits: 5 6 8 10 12 14 17 & 19mm. 7 x TORX Impact Bits: T25 T27 T30 T40 T50 T55 & T60. 1 x Socket Adaptor.PTDFCMNSSJ23PB
£130.99
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Impact socket setIncludes:D1/2" Hex impact sockets: 10-11-12-13-14-15-16-17-18-19-21-22-24-27-30-32 mmDelivered with snap rings and safety pinsPackaged in socket set case with metal clasps - also converts into a modular storage system for use in roller cabinetsSpecifications:Quantity: 17 piecesSquare drive: 1/2"Weight: 3.8kg
from £130.95
Compare prices and buy Expert by Facom 17 Piece 1/2" Drive Hex Impact Socket Set Metric 1/2" E041
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
This thirty five piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/2- inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Supplied in aluminium carry case. Specifications: • Shank Diameter: 1/2 • Pack Qty: 35 piece Contents: 1 x Single flute 3.2mm x 12.7mm cut 1 x Straight 6.3mm x 19mm cut 1 x Straight 9.5mm x 25mm cut 1 x Straight 12.7mm x 19mm cut 1 x Straight 12.7mm x 25mm cut 1 x Straight 19mm x 19mm cut 1 x Pierce and trim 6.3x 18mm 1 x 45 Degree v groove x 12.7mm dia 2 x Dovetail 12.7mm and 14.3mm dia 2 x Cove R3.2mm & R6.35mm 1 x Long series cove R6.35mm x 18mm …
from £77.95 up to £130.95 
Compare prices and buy Trend 35 Piece 1/2 Shank Router Cutter Starter Set SET/SS35X1/2TC
Idealo.co.uk (United Kingdom) →
£78.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Tooled-up.com  →
£131.00
Compare prices3→
Trend Lock Jig for mortice locks and latches - for faceplates up to 250 long Infinitely adjustable sliding plates and stops for mortice and faceplates from 30mm up to 250mm long, ideal for use with obscure sized locks as well as all standard locks and latches. For use in a 1/2in capacity router with 80mm plunge capacity fitted with a 30mm guidebush and 12mm cutter. Suitable trend cutters: 3/75X1/2TC, TR37X1/2TC, C172X1/2TC" Engraved on underside to allow fast, accurate set up for common door widths of 35mm, 40mm, 44mm and 54mm. The infinite adjustment range makes it the ideal jig for fitting the mortice positions for multi point lock strips into wooden doors. With its adaptable sliding …
from £130.95
Compare prices and buy Trend Adjustable Lock Jig LOCK/JIG/B
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
Recessing cutter is designed to accommodate the Carripile I style weatherstrip. It comes complete with a guide bearing to reduce setting-up time and is particulary useful for the meeting rails on sliding box sash windows. Carripile I can be used for compression or sliding applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 45.8 • Dia2 Metric: 35 • Cut Length Metric: 2.2 • Overall Length Metric: 80 • Bearing Dia Metric: 28.6 • Bearing Dia Imperial: 1 1/8
from £130.95
Compare prices and buy Trend Bearing Guided Carripile Offset Leg Router Cutter 45.8mm 2.2mm 1/2"
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. The Finger Jointer fits into any portable or stationary router with a 1/2 inch collet. Performing the cut Timber must be machined square. The cutters should be assembled to match the spindle rotation, and be stacked at 90 degrees to one another to ease stress on the tool. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Overall Length Metric: 96 • Bearing Dia Metric: 28 • Rebate Metric: 6
from £130.95
Compare prices and buy Trend Bearing Guided Finger Jointer Set 40mm 1/2" 866X1/2TC
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 32 • Overall Length Metric: 91.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1
from £130.95
Compare prices and buy Trend Bearing Guided Ovolo and Round Router Cutter 63.5mm 32mm 1/2" 46/18X
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
All articles about bits / sockets
Screwdrivers and drills for dummies
What is the best screwdriver?
Sparks, smoke, crunch and burning smell: what can break in a drill or screwdriver
What to give to a motorist?
Ideal panelling cutter for kitchen or cabinet doors. Specifications: • Shank Diameter: 1/2 • Dia Metric: 73 • Cut Length Metric: 22 • Overall Length Metric: 67 • Radius 1 Metric: 50
from £130.95
Compare prices and buy Trend Dished Radius Panel Router Cutter 73mm 22mm 1/2" 18/18X1/2TC
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.8 • Dia2 Metric: 24 • Cut Length Metric: 25.4 • Overall Length Metric: 64 • Radius 1 Metric: 8 • Radius 2 Metric: 2
from £130.95
Compare prices and buy Trend Drawer Pull Router Cutter 44.8mm 25.4mm 1/2" 84/92X1/2TC
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together. Ideal for speaker cabinets and drawer construction. Please note. These tools cannot be re-sharpened. Inverted use only. Use on MDF and natural timbers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 68 • Cut Length Metric: 30 • Overall Length Metric: 77.5 • Type or Grade: 15 to 25mm • Angle: 45
from £130.95
Compare prices and buy Trend Mitrelock Joint Router Cutter 68mm 30mm 1/2" 10/99X1/2TC
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Compare prices2→
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. "Take it easy" Tool Finder with colour coding according to sizes. Features and Benefits: • Extremely slim ratchet with long lever • Return angle of only 4.7° • Absolutely smooth switchover of the non-detachable push-through square • With Take it easy tool finder: colour coding by size Contents: 1x 8100 SB 7 Zyklop Metal R…
from £109.99 up to £179.99 
Compare prices and buy Wera 8100 SB7 Zyklop 29 Piece 3/8" Drive Socket and Bit Set 3/8" 8100 SB 7
Idealo.co.uk (United Kingdom) →
£110.00
Tooled-up.com  →
£131.00
Mytoolshed.co.uk (United Kingdom) →
£131.00
Zoro.co.uk (United Kingdom) →
£180.00
Compare prices4→
Bits / Sockets Hazet 856-1
Hazet 856-1
Kit:bit 21 pcs, socket heads 10 pcs
Bits:SL, PH, PZ, TH, H, standard
Socket heads:6-points
Landing square:1/4 "
In box:adapter, ratchet wrench, extension, universal joint
Photos 13Prices 1
£130.83
Idealo.co.uk
Delivery: in United Kingdom
Report
Idealo.co.uk
DIN standard design for use with a retaining pin and ring Chrome molybdenum for use with power toolsBlack phosphate finish for easy identification as an impact socket accessoryRing and pin fixing hole on the female end to secure the socket
£130.39
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Conical drill bits, HSS.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left} Product Code Part Number L D Weight mm mm mm g 004240001 424/1 58 314 6 20 004240002 424/2 63 620 8 52 004240003 424/3 60 1630 10 146 004240004 424/4 80 322 8 63 004240005 424/5 102 331 10 172 004240006 424/6 86 2640 13 249 004240007 424/7 89 3650 13 416 004240008 …
£130.37
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Beta Tools Copper-Berillium (Cu-Be) Spark-Proof Tools are specifically designed for safe operations in environments subject to potential risk of explosion, in the presence of flammable liquids and gases, or for any applications that require using perfectly antimagnetic, corrosion-resistant tools.All tools are certified by the Federal Institute for Materials Research and Testing (BAM) under European Directive 99/92/EC.Warning! Risk of explosion in ACETYLENE environment. The mechanical characteristics of spark-proof tools differ from those of normal steel tools. They should be used with extreme caution, avoiding overloads..tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial,…
£130.37
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left} Product Code Part Number Key dimensions L 1 A Weight mm mm mm mm mm g 009290036 929 36 36 49.5 65 48 26 519 009290041 929 41 41 56 70 48 29 597 009290046 929 46 46 62 75 48 32 896 009290050 929 50 50 67.5 80 48 35 1162 009290055 929 55 55 74 85 54 38 1409 009290060 929 60 60 80 90 54 …
£130.37
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Forged From High Quality Chrome Molybdenum Alloy Steel, Radius Corner Design For Better Gripping Of Fastener & Chamfered Openings For Faster Socket Fit Over Fastener. Includes Blow Mold Case. Socket Sizes: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 30 mm
£130.02
Toolbee.co.uk
Delivery: in United Kingdom
Report
Buy!
Toolbee.co.uk
Machine-operated, suitable for all standard electric and air tools Square drive as per DIN 3121 - H 25, ISO 1174 GEDORE vanadium steel 59CrV4 Gun-metal finish DBGM (German utility patent) Particularly suitable for working in sensitive areas permanently governed by certainty against loss, process reliability and occupational safety Examples: overhead power line construction, wind power plants or the automotive sector
£129.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Machine-operated, suitable for all standard electric and air tools Square drive as per DIN 3121 - H 25, ISO 1174 GEDORE vanadium steel 59CrV4 Gun-metal finish DBGM (German utility patent) Particularly suitable for working in sensitive areas permanently governed by certainty against loss, process reliability and occupational safety Examples: overhead power line construction, wind power plants or the automotive sector
£129.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
24 more item(s)
1 ... 15 16 17 18 19 ... 792
Filters
Price
from£ up to£ 
Brands
Set
Items in set
Landing square
Bits included
Socket heads included
More features
Bit length
Socket depth
Got ideas or questions about filters? Click here!
Models