Bits & Sockets Sets

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Designed for use with a standard ratchet or breaker bar.• Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications.• Large LCD display with LED/audible alarm indicating achieved and target torque levels.• Selectable readings in Nm, lb.ft, lb.in or kgf.m.• Accurate to ±2% of stated capacity and operates in either direction.• Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences.• Will also accumulate angle measurement when multiple turns are required, ideal for use wh…

35 piece 3/8" drive set containing regular and deep AF 6 point sockets, 2 spark plug sockets: 16mm and 21mm, 11 screwdriver bits, a fibre reinforced ratchet handle, a universal joint, 4" and 6" extension bars, 1/2" - 3/8" adaptor as well as a coupler adaptor. The set comes supplied in a plastic carrying case with a latch lid, a retractable handle specifically designed for comfort and durability, hard wearing hinges with metal pins for extended life and rubber feet to prevent the set from sliding and also to protect it from scratching. The set also has a clear and simple layout which makes it easy to see what tools are missing when the job is done. (369x198x62mm, 2.2 kilos). Contents: Bits 1/4" …

Features:- CNC ground spiral flute enables optimised chip removal and less vibration for even drilling- Highest cutting smoothness due to axial and radial relief grinding- Made of HSS for a long lifetime. Laser-markings for hole diameters.- AlTiN coating for maximum lifetime, laser-markings for hole diameters, 3-flat shank for high-torque transmission- The step drill bit is made of HSS (high-speed steel) and coated with AlTiN (Aluminium Titan Nitride). It thus offers the maximum lifetime possible and does not require the use of a coolant. Easily visible and durable markings of the hole diameter are provided by laser-marked figures in both spiral flutes. In addition, the 3-flat shank prevents …

CBN ground and spiral grooves ensure quiet operation and high cutting performance.Especially the chip flow is optimized, so even long, non-breaking chips are easily removed.Optimized chip flow protects cutting edges and reduces edge buildup and cold weld marks.The cone makes it easier to remove the tool from the material.Technical data:Number of cutting edges:2.Coating:uncoated.Shaft:3-way clamping surface.Cutting direction:cutting right.Material:HSS.Tolerance:working specification.Tip angle:118.Pitch angle:90.Application areas:Main application:Steel 900 N/mm², Aluminum, Brass, Plastics.Other applications:Bronze, Cast iron.

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish Specifications • Drive: 1” • Size: 63mm

The Sirius SET12MHDM is a 6 piece male hexagon driver set, supplied in a protective metal casing. Specifications • Drive: 3/4" • Measurement: MetricContents• 6x 3/4" Drive Impact Hex Socket: 12, 14, 17, 19, 22, 24 mm • Plastic Tray • Metal Case

Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. Down-cut pushes woodchips below the work. Two flute. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 31.8 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76 • Overall Length Imperial: 3 • Type or Grade: Down-cut

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 31.8 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76 • Overall Length Imperial: 3 • Type or Grade: Up-cut

Replacement jig body for the CDJ300.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

NK.240A 3/4" drive impact universal joint. For your safety, use impact universal joints with the appropriate rings and pins. Specifications • Drive: 3/4" • Weight: 720g

Crafted from high-quality copper beryllium alloy, this socket offers exceptional strength and durability while minimising the risk of sparks that could ignite flammable materials. With its bi-hexagon design and metric sizing, these sockets provide a precise fit for a wide range of fasteners, ensuring efficient and secure fastening operations. The 3/4" drive size offers compatibility with various impact wrenches and other tools, allowing for versatile use across different applications. Features & Benefits • Made from a special non sparking and anti-magnetic copper beryllium alloy. Specifications • Drive: 3/4" • Socket Size: 19mm • Socket Type: Standard • Overall Length: …

• PREMIER PLATINUM SERIES – Fully polished micro satin finish. • CHROME VANADIUM STEEL – Professional socket set with heat treated Chrome Vanadium steel sockets and accessories. • 104PC SET- Covers sizes from 4 to 32mm in standard socket sizes and 6 to 32mm in deep socket sizes.• 90-TOOTH RATCHET – Features 90-tooth ratchet wrench with push button quick release, extension bars, universal joint, adaptors, sliding T-bar and spinner handle.• CONTENTS MAP INSIDE THE LID – Contents includes: 1/4” and 1/2"Sq Drive Standard, Deep and Female TRX-Star* Sockets, 1/4" and 1/2"Sq Drive 90-Tooth Gear-to-Gear Ratchet Wrenches and accessories including Extension Bars, Universal Joints, 3/8”Sq Drive Female …