Bits & Sockets Sets

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Designed for use with a standard ratchet or breaker bar.• Ideal for work around the engine bay and the tight more→ening of wheel nuts to factory specifications.• Large LCD display with LED/audible alarm indicating achieved and target torque levels.• Selectable readings in Nm, lb.ft, lb.in or kgf.m.• Accurate to ±2% of stated capacity and operates in either direction.• Features angle mode, eliminating the need for angle gauges and protractors providing an accurate and fast way to measure torque plus angle tightening sequences.• Will also accumulate angle measurement when multiple turns are required, ideal for use wh…

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications: &b more→ull; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90

Two flute helical cutters suitable for non-ferous metals with long shank, fine finish & up-cut. Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used more→with a coolant, wax stick or lubricant. Material should be securely clamped. Specifications: • Shank Diameter: 8 mm • Dia Metric: 8 • Cut Length Metric: 20 • Overall Length Metric: 63 • Type or Grade: Up-cut

A routing template that allows a router to create a 26mm or 35mm diameter blind hole recess for a circular cabinet door hinge. Cuts an accurate recess for either 26mm or 35mm circular hinges. Adjust more→able alloy edge guide for adjustment of recess position from top or bottom of door. Removable alloy edge guide for middle hinge recess. 3mm and 5mm location holes to accurately position the recesses relative to the edge of the door. Engraved centre sight lines. Pin holes reversible for left hand and right hand doors. Made from hard wearing 12mm thick high pressure laminate. Requires 12.7mm diameter cutter, 30mm guide bush and two 100mm throat F-clamps. Contents: 1 x Sliding stop 4 x ABS …

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • S more→awbore: 12 • Saw Kerf Metric: 10 • Saw Teeth: 4

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 12 • Overall Length Metric: 66.5 • Radius more→1 Metric: 6

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving acce more→ssory with locking pin. Sold loose.

Socket Set / 12 Number of Items

Fast release button^Chrome vanadium steel for quality, strength and performance^Stylish satin chrome finish - easy to clean

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications: • Shank Diamet more→er: 1/2 • Dia Metric: 22.5 • Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19 • Angle: 2

For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Dia Imperial: 2 • Cut Length Metric: 33 • Overall Lengt more→h Metric: 71 • Angle: 45

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Met more→ric: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

One piece tool to increase glueing area for edge to edge joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 38.1 • Overa more→ll Length Metric: 90

This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2

The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Lengt more→h Metric: 70 • Radius 1 Metric: 12.5