Bits & Sockets Sets

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 18 • Overall Length Metric: 5 more→6.1 • Radius 1 Metric: 12.7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Overall Length Metric: 66

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 32 • Overall Length Metric: 80 &bul more→l; Bearing Dia Metric: 19 • Radius 1 Metric: 9.5

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 15.9 • Overall Length Metric: 56 • Ra more→dius 1 Metric: 12.7

Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in acylic, wood, and manmade boards, solid surface material and foam boards. Single O flute design for more→fast cutting. Increased feed rates allowing for more linear metres in less time. Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life. Downcut for better clamping when machining small workpieces and improved finish on the tops of the board. For use on routers and CNC routers. Up-cut spiral and can be used to plunge cut. Eject chips up or down depending on tool …

The Wiha Collector Standard Bit Set 61 Piece for both machine and hand operation. The robust Collector box is made from high-tensile plastic. The box opens automatically at the press of a button.Bits more→conform to DIN 3126, ISO 1173, Style C6,3. This 61 Piece Set contains the following: 4 x 25mm Standard Slotted Bits: 4.5, 5.5, 6.5 & 8.0mm. 23 x 25mm Standard Phillips Bits: PH1(x7), PH2(x13) & PH3 (x3). 23 x 25mm Standard Pozidriv Bits: PZ1(x7), PZ2(x13) & PZ3 (x3). 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Mechanically Lockable Bit Holder 60mm.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal w more→ear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

DS max-7:30 x 400 x 520.Bosch Accessories.Product net weight (kg):1,248.Electric tool accessories.

Hex SocketFeatures:- Safety lock- Fast release button- Matt Chrome finish- Chrome vanadium steel- For manual useSpecifications:Socket size: 60mmLength: 84mmWeight: 1432g

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use.• BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and no more→n-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2.• FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling.• DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity.• 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage.• 1/2”SQ DRIVE – 22mm Socket with…