Bits & Sockets Sets

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 96.52 • Overall Length Metric: 160.2

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Metric: 96.52 • Overall Length Metric: 160.2

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Replacement jig body for the CDJ300.

Classic skirting board mould with a curved return to the edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 41 • Overall more→Length Metric: 90 • Bearing Dia Metric: 16 • Radius 1 Metric: 10

Shape similar to Ref. 18/80. Suitable panel mould for use with Ref. PSC/5 & PSC/50. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.5 • Cut Length Metric: 38 • Overall Le more→ngth Metric: 76 • Angle: 75

Two lengths of extrusion with jointing piece to give a maximum working length of 100 inches (2540mm). Reduced length for easier transport and storage. Clamps can slide along each extrusion. Maximum more→material clamp thickness 32mm. Adjustable friction washer on clamps prevent clamp from sliding too freely. One extrusion has dual metric/imperial scale. Can be combined with Varijig parts. Contents: 1 x 56" Alloy extrusion with scale 1 x 56" Alloy extrusion 1 x Connecting block 1 x Hex key 4mm 2 x Sliding clamps

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium more→extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731. Specifications: • Cut Length Metric: 610 • Cut Length Imperial: 24 • Type or Grade: Max clamp 610 mm

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium more→extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731. Specifications: • Cut Length Metric: 1270 • Cut Length Imperial: 50 • Type or Grade: Max clamp 1270 mm

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium more→extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731. Specifications: • Cut Length Metric: 915 • Cut Length Imperial: 36 • Type or Grade: Max clamp 915 mm

Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down, giving a fine finish. For trimming veneered and double-faced boards, plywoods and natural timbers. These cutters have the more→action of pushing the chips towards the middle of the board being cut, thus ensuring that the veneers are sheared off cleanly in the process. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 54 • Overall Length Metric: 108

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush more→fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

This 30mm guide bush is a popular router accessory that fixes to the router base and acts as a small ring fence The Trend GB30 is a 30mm guide bush designed to guide the router when using a template. more→It fits directly to the Trend T3, T4, T5, T5 MK2, T9, T10 and T11 and some other light duty routers. Features:
- This guide bush guides the router when using a template
- Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 and T11, and some other light duty routers
- Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base Specification:
- Diameter: 30mm

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or more→UNIBASE Sub-base. Specifications: • Dia Metric: 25.4 • Dia Imperial: 1 • Dia2 Metric: 22.4 • Cut Length Metric: 6Features & Benefits• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or more→UNIBASE Sub-base. Specifications: • Dia Metric: 20 • Dia2 Metric: 17 • Cut Length Metric: 6Features & Benefits• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/2 • Dia Metri more→c: 24 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 75

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: more→1 • Cut Length Metric: 6.3 • Cut Length Imperial: 1/4 • Overall Length Metric: 55 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Rebate Metric: 6

To produce an undercut on relief lettering to create a more aesthetic appearance, as well as for edge grooving. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: more→3/4 • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Overall Length Metric: 53 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Rebate Metric: 3

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen workto more→ps. TC tips are ground with greater clearance for routing of resinous material. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 99 • Type or Grade: Clearance ground

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100