Bits & Sockets Sets

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use.• BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and no more→n-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2.• FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling.• DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity.• 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage.• 1/2”SQ DRIVE – 22mm Socket with…

• Three high-speed HSS M2 spiral flute step drills.• Double spiral flutes for efficient swarf clearance.• Allows clog-free, precision drilling of 18 different size holes with just three bits.• Size #1 more→: ø4-12mm.• Size #2: ø4-22mm in 2mm increments.• Size #3: ø4-30mm in 2mm increments.• Supplied in flip-up metal case.Three high-speed HSS M2 spiral flute step drills. Double spiral flutes for efficient swarf clearance. Allows clog-free, precision drilling of 18 different size holes with just three bits. Supplied in flip-up metal case.• Three high-speed HSS M2 spiral flute step drills. • Double spiral flutes for efficient swarf clearance. • Allows clog-free, precision drilling of 18 diffe…

• Superior quality SDS MAX drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS MAX drill bit suitable for a variety of applications. Drills are more→fully hardened and ground.Technical Specification:Size: ø40 x 920mmWeight: 4.44KgWarranty: Consumable

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. With locking pin for secure socket holding. Sold loose.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 &bull more→; Dia Metric: 28 • Dia2 Metric: 25.7 • Cut Length Metric: 17 • Overall Length Metric: 66.5 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 4.8

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 &bull more→; Dia Metric: 28 • Dia2 Metric: 25.7 • Cut Length Metric: 17 • Overall Length Metric: 57 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 4.8

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Leng more→th Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Leng more→th Metric: 55 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 105

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 5 • Saw Teeth: 4

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Platinum series.• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths. more→• Hardened (58-62 HRC) and tempered for added strength.• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.• Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Security TRX-Star* Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Ribe Bits; M5, M6, M7, M8, M9, M10, M12, M14 (1 each 30 and 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive…

1/2" square drive digital torque adaptor supplied with calibration certificate The Sealey STW290 is designed for use with a standard ratchet or breaker bar, ideal for tightening wheel nuts to factory more→specifications. This model has a 1/2" square drive and a range of 40-200Nm. The large LCD display with LED/audible alarm indicates achieved and target torque levels. Features:  
- Designed for use with a standard ratchet or breaker bar 
- Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications 
- Large LCD display with LED/audible alarm indicating achieved and target torque levels 
- Selectable readings in Nm, lb.ft, lb.in, kg.cm or kg.m and accur…