Bits & Sockets Sets

CBN ground and spiral grooves ensure quiet operation and high cutting performance.Especially the chip flow is optimized, so even long, non-breaking chips are easily removed.Optimized chip flow protects cutting edges and reduces edge buildup and cold weld marks.The cone makes it easier to remove the tool from the material.Technical data:Number of cutting edges:2.Coating:uncoated.Shaft:3-way clamping surface.Cutting direction:cutting right.Material:HSS.Tolerance:working specification.Tip angle:118.Pitch angle:90.Application areas:Main application:Steel 900 N/mm², Aluminum, Brass, Plastics.Other applications:Bronze, Cast iron.

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

Comprehensive socket set for use around the home. Each socket is made from chrome vanadium steel, that's hardened and tempered with a matt finish. Each socket has a knurled ring for extra grip. Supplied with a 72 tooth reversible soft grip ratchet and a host of accessories. Packed in a tough plastic storage case.

35 piece socket set
3/8 inch 6-point drive
Made from chrome vanadium steel
Provide excellent torque
Supplied in plastic box

GEDORE INS 20 PM Screwdriver bit socket set 1/4" 15 pcs IN-IS-PH-PZ
GEDORE stands for a universal, comprehensive offer of high-end tools, special tools. The GEDORE quality promise is based on 100 years of forging competence
The closest attention is paid to every single detail of every single GEDORE tool: qualified staff, intelligent construction, first-class materials and modern production methods

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar and they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish Specifications • Drive: 1” • Size: 63mm

The Sirius SET12MHDM is a 6 piece male hexagon driver set, supplied in a protective metal casing. Specifications • Drive: 3/4" • Measurement: MetricContents• 6x 3/4" Drive Impact Hex Socket: 12, 14, 17, 19, 22, 24 mm • Plastic Tray • Metal Case

Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. Down-cut pushes woodchips below the work. Two flute. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 31.8 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76 • Overall Length Imperial: 3 • Type or Grade: Down-cut

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive material. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 31.8 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 76 • Overall Length Imperial: 3 • Type or Grade: Up-cut

Replacement jig body for the CDJ300.

The Bahco S18TORX 1/2in Drive Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Contains: 9 x Short TORX Bit 1/2in Sockets: TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55, TX60 9 x Long TORX Bit 1/2in Sockets: TX20, TX25, TX27, TX30, TX40, TX45, TX50, TX55, TX60Additional Information:• Set Type: Metric• Socket Type: Torx• Range: TX20-TX60• No. Sockets: 18

NK.240A 3/4" drive impact universal joint. For your safety, use impact universal joints with the appropriate rings and pins. Specifications • Drive: 3/4" • Weight: 720g

Crafted from high-quality copper beryllium alloy, this socket offers exceptional strength and durability while minimising the risk of sparks that could ignite flammable materials. With its bi-hexagon design and metric sizing, these sockets provide a precise fit for a wide range of fasteners, ensuring efficient and secure fastening operations. The 3/4" drive size offers compatibility with various impact wrenches and other tools, allowing for versatile use across different applications. Features & Benefits • Made from a special non sparking and anti-magnetic copper beryllium alloy. Specifications • Drive: 3/4" • Socket Size: 19mm • Socket Type: Standard • Overall Length: …

• PREMIER PLATINUM SERIES – Fully polished micro satin finish. • CHROME VANADIUM STEEL – Professional socket set with heat treated Chrome Vanadium steel sockets and accessories. • 104PC SET- Covers sizes from 4 to 32mm in standard socket sizes and 6 to 32mm in deep socket sizes.• 90-TOOTH RATCHET – Features 90-tooth ratchet wrench with push button quick release, extension bars, universal joint, adaptors, sliding T-bar and spinner handle.• CONTENTS MAP INSIDE THE LID – Contents includes: 1/4” and 1/2"Sq Drive Standard, Deep and Female TRX-Star* Sockets, 1/4" and 1/2"Sq Drive 90-Tooth Gear-to-Gear Ratchet Wrenches and accessories including Extension Bars, Universal Joints, 3/8”Sq Drive Female …