Bits & Sockets Sets

Supplied with two bearings. The larger bearing removes the bottom quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63 • Cut Length Metric: 20 • Overall Length Metric: more→79 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 2 Metric: 9.5

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 57.1 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 79 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 22.2 • Radius 1 Imperial: 7/8

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 52 • Cut Lengt more→h Metric: 25 • Overall Length Metric: 82 • Angle: 45

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 25.4 • Cut Length more→Imperial: 1 • Overall Length Metric: 90.9 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 25.4

For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications: • Shank Diameter: 1/4 • Dia Metric: 31 &b more→ull; Cut Length Metric: 17 • Bearing Dia Metric: 9.5 • Type or Grade: Profile/scribe set • Radius 1 Metric: 17 • Pack Qty: 2 piece Contents: 1 x C266 Profile 1 x C273 Scribe

A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. Set Ref. C255 can be converted to Ref. 256, and vice-versa, by purchas more→ing the respective groover. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47 • Dia2 Metric: 34 • Cut Length Metric: 11 • Overall Length Metric: 81 • Bearing Dia Metric: 34 • Angle: 45

For door and window construction, decorative panelling and many other joinery applications. Designed for 44mm timber thicknesses. Specifications: • Shank Diameter: 1/4 • Dia Metric: 36.7 more→• Cut Length Metric: 9 • Bearing Dia Metric: 9.5 • Type or Grade: Profile/scribe set • Radius 1 Metric: 9 • Pack Qty: 2 piece Contents: 1 x C077A Profile 1 x C272 Scribe

An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Dia2 Metric: 22 • Cut Length Metric: more→17 • Overall Length Metric: 61 • Radius 1 Metric: 6

With plunge cut these cutters can be used to cut and mould hand holes in stool seats. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 25 • Overall Len more→gth Metric: 86.2 • Radius 1 Metric: 15

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable for use with Ref. PSC/2. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 22.2

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable panel mould for use with Ref. PSC/5. Available as set Ref. PDS/5. Specifications: • Shank Diameter: 1/2 • Dia Metric: 86 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 71 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 …

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Angled panel raiser. Suitable panel mould for use with Ref. PSC/5. Specifications: • Shank Diameter: 1/2 • Dia Metric: 67.7 • Dia2 Metric: 6 • Cut Length Metric: 19 • Overall Length Metric: 67 • Angle: 25

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 31.7 • Overall Length Metric: 70 • Ra more→dius 1 Metric: 25.4

Compact Zyklop Ratchet With Integrated Bit Magazine And Combination Holder For Bits And Nuts.With Integrated Bit Magazine:- A Captive, Freely Swivelling Bit Magazine For 12 Bits (1 /4´´, 25 Mm Length) more→Is Integrated In The Handle Of The Compact Zyklop Ratchet.Swivelling Bit Magazine:- The Swivelling Bit Magazine Makes It Easy To Remove The Bits In Almost Any Situation. The Bits Are Safely Stored.Switchable:- The Zyklop Pocket Ratchet Can Be Quickly And Easily Switched For Right/Left-Handed Operation In Any Position Via The Knurled Wheel.Freely Swivelling Ratchet Head:- The Ratchet Head Can Be Freely Swivelled And Locked In Any Fixed Position By Means Of The Slide Switch On Both Sides. Problem-Free Wo…

The SDS max-7 Drill Bit is ideal for use at the highest drilling speeds. Its solid carbide S-cutter and inclined side cutters enable very fast drilling. Furthermore, the bit´s vibration-optimised flut more→e design offers the best power transfer and increases in speed. This product is intended for use in concrete and reinforced concrete, limestone and masonry. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. I…

Crafted from high-quality copper beryllium alloy, this socket offers exceptional strength and durability while minimising the risk of sparks that could ignite flammable materials. With its bi-hexagon more→design and metric sizing, these sockets provide a precise fit for a wide range of fasteners, ensuring efficient and secure fastening operations. The 3/4" drive size offers compatibility with various impact wrenches and other tools, allowing for versatile use across different applications. Features & Benefits • Made from a special non sparking and anti-magnetic copper beryllium alloy. Specifications • Drive: 3/4" • Socket Size: 17mm • Socket Type: Standard • Overall Length: …

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 60mm

This Sirius 12 piece router bit set includes the essential router cutters needed for general purpose use with a 1/4" machine. These professional quality 1/4" shank cutters come in a foam padded alumin more→ium case with plastic bumpers and a durable latch to keep them securely packed away during transport.Features & Benefits• 1/4" shank router cutter set for general purpose use • Wide selection of bits • Suitable for cutting, grooving, chamferring, trimming and profiling • Foam padded storage caseContents• 1/4" Shank Straight Bit 6 x 20mm • 1/4" Shank Straight Bit 12 x 20mm • 1/4" Shank Straight Bit 16 x 20mm • 1/4" Shank 90 Degree Grooving Bit 12.7mm • …