Bits & Sockets Sets

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 56mm

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 58mm

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63.5 • Dia Imperial: 2 1/2 • Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 88.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1

• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials.• 135° Split point tip enables bits to bite workpiece quickly reducing the need for centre mark.• Drills can more→be resharpened without affecting their performance.• Sizes: ø1-13mm in 0.5mm increments.• Supplied in metal storage case.Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials. 135° Split point tip enables bits to bite workpiece quickly reducing the need for centre mark. Drills can be resharpened without affecting their performance. Supplied in metal storage case.• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials. • 135°…

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish more→Specifications • Drive: 1” • Size: 55mm

Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks. Features & Benefits: • Drop-forged, 8-point, steel impact socket designed for the removal o more→f front hub nut found on Scania trucks. • Model No. CV001 Specifications: Model No CV001 Brand: Sealey Nett Weight: 1.70kg Drive: 3/4"Sq Size: 80mm Application(s): Scania Truck

For architraves, framing as well as edge moulding. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Dia2 Metric: 26 • Cut Length Metric: 38 &bul more→l; Overall Length Metric: 87 • Bearing Dia Metric: 16 • Radius 1 Metric: 7 • Radius 2 Metric: 5

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip more→is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 10 • Overall Length Metric: 60 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 10mm strip

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip more→is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 20mm strip

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. Specifica more→tions: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 25 • Overall Length Metric: 76.87 • Bearing Dia Metric: 21.8 • Angle: 78

Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Specificatio more→ns: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 24 • Overall Length Metric: 72 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5

An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 13 • Overall Leng more→th Metric: 48 • Radius 1 Metric: 4

Use in two passes from left & right to cut a protruding grip handle. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 17 • Overall Length Metric: 60 &bu more→ll; Radius 1 Metric: 1.5 • Radius 2 Metric: 2

Bearing guided tool to rout stepped groove for espagnolette lock recess. Two flute for clean finish. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40.05 • Cut Length Metric: 16. more→3/12.3 • Overall Length Metric: 85 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Four fluted TCT trimmer/profiler. Super fine finish. Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. more→Allows for irregular grained timber to be profiled more easily, by turning component other way up. Light passes, maximum 2mm trimming. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 114.5 • Bearing Dia Metric: 19.1

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timber and MDF. When joining sections to produ more→ce solid wood panels, alternate the growth ring direction of adjacent boards to prevent cupping. When moulding the panel, cut across the end grain first. Any break out will then be removed when cutting with the grain. Suitable panel mould for use with Ref. PSC/5. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.1 • Angle: 10